Search results

*10.1-inch DSI touch screen with 10-point capacitive touch control. *Can be directly connected to the LCD by the DSI interface of the Raspberry Pi, and its refreshing rate is up to 60Hz.

...{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/7.9inch-dsi-lcd.htm}}]] |caption=400 x 1280, RPI, DSI

|name1 = 7inch DSI LCD |name2 = 7inch DSI LCD (with case A)

*Directly drive the LCD by the DSI interface on the Raspberry Pi, with up to 60Hz refreshing rate. *Use an FFC cable to connect the 5-inch DSI LCD to the 15-pin DSI interface on the Raspberry Pi board.

*Directly drive the LCD by the DSI interface on the Raspberry Pi, with up to 60Hz refreshing rate. *Use an FFC cable to connect the 4.3-inch DSI LCD to the 15-pin DSI interface on the Raspberry Pi board.

*8-inch DSI touch screen with 10-point capacitive touch. *Drive LCD directly through Raspberry Pi's DSI interface with a refresh rate of up to 60Hz.

*7-inch DSI touch screen, 5-point capacitive touch control. *Support drives the LCD directly via the DSI interface of the Raspberry Pi, and the refresh rate is up to 60Hz.

*Directly drive the LCD by the DSI interface on the Raspberry Pi, with up to 60Hz refreshing rate. :[[File:8inch-DSI-LCD-Manual-design.jpg|600px]]

...|{{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/5inch-dsi-lcd.htm}}]] |caption=5inch capacitive Touch Screen LCD for Raspberry Pi<br/>DSI Interface

|1||Compute Module interface |2||DSI interface

...{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/4.3inch-dsi-lcd.htm}}]] |caption=4.3inch capacitive Touch Screen LCD for Raspberry Pi, DSI Interface

...">To test the Raspberry Pi camera, you need to connect an HDMI screen or a DSI screen to the Raspberry Pi.</font><br/> ...the camera interface of the Raspberry Pi Zero series is next to the Power interface. If you are using a computing module, the specific layout of the backplane

|name1 = 7inch DSI LCD (with cam) |name2 = 7inch DSI LCD (with cam and case)

1. Connect the DSI interface of the LCD to the DSI interface of the Raspberry Pi board.<br/> [[File:8inch DSI LCD C RPI.jpg]]

|interface1=DSI ...h Raspberry Pi Compute Module 4. Although it is tiny, it can bring out the interface of Raspberry Pi Compute Module 4 with an onboard camera.

1. Connect the DSI interface of the LCD to the DSI interface of the Raspberry Pi board.<br/> [[File:8inch DSI LCD C RPI.jpg]]

...''To test the Raspberry Pi camera, you need to connect an HDMI screen or a DSI screen to the Raspberry Pi'''</font><br/> ...the camera interface of the Raspberry Pi Zero series is next to the Power interface. If you are using a computing module, you must refer to the specific layout

*4-inch DSI touch screen with 5-point capacitive touch control. *Drive LCD directly through Raspberry Pi's DSI interface with a refresh rate of up to 60Hz.

CSI and DSI interfaces are closed by default, they will use the I2C-10, I2C-11 and I2C- ...n using any DSI, HDMI1 has no image output, even if you do not connect the DSI screen, as long as the corresponding file is compiled, then HDMI1 will not

*Directly drive the LCD by the DSI interface on the Raspberry Pi, with up to 60Hz refreshing rate.

*Drive the LCD directly via the DSI interface of the Raspberry Pi, up to 60Hz refresh rate. ...ports Pi 4B/3B+/3A+, another [https://www.waveshare.com/dsi-cable-15cm.htm DSI-Cable-15cm] is required for CM3+/4.

...|{{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/5inch-dsi-lcd-b.htm}}]] |caption=5inch Capacitive Touch Screen LCD for Raspberry Pi, DSI Interface

*The DSI interface is DSI1. ...B Type C interface is for the power supply or can be used as the USB SLAVE interface for programming images.

*Directly drive the LCD by the DSI interface on the Raspberry Pi, with up to 60Hz refreshing rate. 1. Using the FFC cable, connect the 7inch DSI LCD to the 15PIN DSI interface of the Raspberry Pi board.<br>

|name=2.8inch DSI LCD ...fault|}}|url=link=https://www.waveshare.com/2.8inch-dsi-lcd.htm}} |2.8inch DSI LCD}}]]

*3.4-inch DSI round display with 10-point capacitive touch. *Directly drive LCD via Raspberry Pi's DSI interface, refresh rate up to 60Hz.

*Directly drive LCD through the DSI interface of Raspberry Pi, refresh rate up to 60Hz. *Drive the camera directly through the CSI interface of Raspberry Pi, the video frame rate supports 1920 × 1080p@30, 1280 × 72

|name = 7inch DSI LCD (C) ...default|}}|url=link=https://www.waveshare.com/7inch-dsi-lcd-c.htm}}|7inch DSI LCD (C)]]

...{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/4.3inch-dsi-qled.htm}}]] |caption=800x480, DSI

...or users who need a lightweight DSI display. Compared with the traditional DSI screen, it is lighter and more convenient for secondary development. .../3+/4 expansion board need a [https://www.waveshare.com/dsi-cable-15cm.htm DSI Cable 15cm].

...o jack and the HDMI port. the CSI connector of Pi zero is beside the Power interface. If you use Compute Module, please check the actual place of the carrier bo Connect the metal side of the cable to the camera interface.<br/>

===CSI and DSI=== ...I2C-10, I2C-11, and I2C-0, will be occupied when using the CSI camera and DSI screen.<br/>

...or users who need a lightweight DSI display. Compared with the traditional DSI screen, it is lighter and more convenient for secondary development. .../3+/4 expansion board need a [https://www.waveshare.com/dsi-cable-15cm.htm DSI-Cable-15cm].

CSI and DSI are disabled by default. When using the camera and DSI, it will occupy three I2C devices: I2C-10, I2C-11, and I2C-0.<br> And then connect the cameras and DSI display.<br>

3: The Type C interface is only used as the USB SLAVE interface to program the image, and cannot be used as a power supply. <br> ...r supply of CM4, please do not connect other devices when using the Type C interface to burn the image. <br>

...the camera interface of the Raspberry Pi Zero series is next to the Power interface. If you use Compute Module, please check the actual place of the carrier bo ...t the metal surface of the FFC cable downward, and then connect to the CSI interface.

2: <font color="#ff0000">DSI interface is changed from DSI0 to DSI1, high resolution is supported</font><br> ...the DSI1 display interface is not connected. (V4 version starts to display interface for DSI1)<br>

| Display interface || Standard HDMI port|| / | Power port || 5V Type-C interface || /

...single-supply, low-power, 8-bit data acquisition device with a serial I2C interface and an 8-channel multiplexer. The analog-to-digital (A/D) converter has a t ==CSI DSI==

*DSI interface, refresh rate up to 60Hz. *Support Pi 4B/3B+/3A+, CM3+/4 must be used with [https://www.waveshare.com/dsi-cable-15cm.htm adapter cable].

#DO NOT connect other devices while writing CM4 via Type C interface for stable working. |MIPI DSI port (15pin 1.0mm FPC connector)

...#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/11.9inch-dsi-lcd.htm?amazon}}]] |caption=320 x 1480, RPI, DSI

4）Connect the USB interface of the STEREO board to the PC.<br /> ...board to start the CM3/CM3+ by connecting the 5V power adapter to the PWR interface.<br />

...{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/7.9inch-dsi-lcd.htm}}]] |caption=400 x 1280, RPI, DSI

...the Raspberry Pi Compute Module 4. It is powered by a 5V/ 2.5A USB Type C interface. 2: <font color="#FF0000">The DSI interface is changed from DSI0 to DSI1, which already supports high resolution. </fon

*Onboard HDMI / DSI interfaces for connecting displays. *Cooling fan interface, autorun on power-up OR controlled by IO pins.

The M.2 interface type is M KEY, which only supports PCIE channel devices (including NVME sol ==LCD Interface==

...is a baseboard of Raspberry Pi Compute Module 4 with a 5V/2.5A USB Type C interface. #The Type C interface can be used as a power supply or as a USB SLAVE interface to burn the image.

*DSI interface is DSI1. |1||Micro USB||5V/2.5A power supply, can also be used as an eMMC programming interface

|interface1=DSI ...h Raspberry Pi Compute Module 4. Although it is tiny, it can bring out the interface of Raspberry Pi Compute Module 4.

...ng off-the-shelf components such as Raspberry Pi HAT and PCIe modules. Its interface is concentrated on the same side, which is convenient for users to use. Note: PCle interface does not support MSI-X. Typical PCle devices will fall back to MSI.

The M.2 interface type is M KEY, which only supports PCIE channel devices (including NVME sol <font color="#ff0000"> Please note that DSI and CSI are prohibited when using RTC. </font><br/>

|caption=DSI<br/>10.3" HDMI EINK Monitor<br/>Resolution: 1872x1404<br/>Compatible with R This is a 10.3inch e-Paper monitor with a resolution of 1872 x 1404, HDMI interface. Supports Raspberry Pi, jetson Nano and Windows PC.

*Short press in the power-on state: switch to another interface (in the case of running the example, otherwise invalid) ==CSI DSI==

...network communication modes, and expands a variety of industrial isolated interface resources (such as CAN, RS485, RS232, ADC, GPIO, etc.), which is suitable f ...tiation Ethernet port, supports power via the PoE Ethernet interface (RJ45 interface specification).

...o USB cable to connect the Touch interface of the touch screen and any USB interface of the PC. [[File:5inch-DSI-LCD-3.gif]]

3: The Type C interface of the USB SLAVE is only used to burn the image and cannot be used for powe ...r supply of CM4, please do not connect other devices when using the Type C interface to burn the image. <br>

...USB SLAVE interface is used to burn the image and cannot be used as an OTG interface. <br> 5: Onboard default 4-way USB 2.0 interface. <br>

*CSI camera interface *DSI display interface

...set the jumper 22 to the DIS side and connect a power adapter to the POWER interface. *Connect the SLAVE interface of the PoE board to your PC

..."> Note that if you want to use the RTC function, please first disable the DSI and CSI. And I2C-10 is used by default.</font><br/> ==CSI DSI==

...s the USB SLAVE interface to burn the image, and cannot be used as the OTG interface.<br> 5: Onboard default 4 x USB 3.2 Gen1 interface.<br>

The RS485 interface is disabled by default, if you want to enable it, please modify the config. The CAN interface is disabled by default, if you want to use it, please modify the config.txt

3. The Type C interface is only used as a USB SLAVE interface to burn images, and cannot be used as a power supply.<br/> |14||DISP1 port||MIPI DSI display port, DISP1 port

3. Only support LCD direct connection as there is not a DSI interface.<br/> 4. Type C interface can be used as the power supply or the USB SLAVE for programming images.<br

3. Micro USB is used as a USB SLAVE interface to write images, not as an OTG interface.<br/> |4||USB SLAVE Interface||Writing emmc for Compute Module 4

<font color="#ff0000"> Please note that DSI and CSI are prohibited when using RTC. </font><br/> ==CSI DSI==

:1. Connect the Touch interface to the USB interface of the Raspberry Pi. :2. Connect the HDMI interface to the HDMI interface of the Raspberry Pi.

3: Type C interface can be used for the power supply or a USB SLAVE interface for burning images. <br> ...r supply of CM4, please do not connect other devices when using the Type C interface to burn the image. <br>

<font color="#ff0000"> DO NOT use DSI and CSI when using RTC.</font><br/> ==CSI DSI==

|caption=Compute Module 3 Adapter<br/>HDMI, CSI, DSI *CM3 interface: used to connect to the CM3 baseboard.

...nboard four isolated RS485 interfaces, 100M+1000M dual network ports, HDMI interface, two CSI interfaces, two USB interfaces, etc... #The Type C interface can be used as a power supply or as a USB interface to burn the image (need to use the DIP switch to switch).

...o jack and the HDMI port. The CSI connector of Pi zero is beside the Power interface. If you use the Compute Module, please check the actual place of the carrie ...e metal surface of the flexible cable is downward, then connect to the CSI interface.

|interface1 = DSI ...also be used as the power supply interface, but cannot be used as the OTG interface.<br />

* [[10.1inch DSI LCD (C)]] * [[11.9inch DSI LCD ]]

3. DO NOT connect other devices while writing CM4 via the Type C interface for stable working.<br/> |3||USB 2.0 interface||3x 2.0 interfaces, support various USB device insertion

*CSI camera interface *DSI display interface

...USB SLAVE interface is used to burn the image and cannot be used as an OTG interface.<br> 5. Onboard default 4-way USB 2.0 interface.<br>

*CSI camera interface *DSI display interface

#The Type C port can be used as a power supply or as a USB SLAVE interface to program images.<br> ...r supply of CM4, please do not connect other devices when using the Type C interface to program the image. <br>

*With 3.5mm audio and speaker interface, support HDMI audio output.<br/> 1. Set the touch interface selector switch on the back of the screen to "I2C".<br>

|caption=DSI, CSI, micro HDMI, USB2.0/3.0 <br/>I2C, I2S, SPI, UART, RPi, Ethernet *2 × 4-lane MIPI DSI/CSI interface

===Open I2C interface=== ...ng serial debugging, you can directly connect to the computer through this interface to log in to the CM4<br>

|interface1 = DSI ...rage drive. In this case, the Raspberry Pi 4 can be booted through the USB interface, which greatly improves the reading and writing speed and makes the boot sp

...r supply of CM4, please do not connect other devices when using the Type C interface to program the image. <br> 6: <font color="#ff0000">The USB2.0 interface is disabled by default, you should add line ''dtoverlay=dwc2,dr_mode=host''

The computer is connected to the ETH0 interface, and then directly ssh remote login or web page login.<br /> .../www.raspberrypi.org/documentation/hardware/computemodule/cmio-display.md DSI Display Reference]

*With 3.5mm audio and 4PIN speaker interface, it also supports HDMI audio output. 1) Connect the 12V power supply to the DC interface of the LCD, and you can see that the LCD backlight is on normally.<br/>

Connect the Raspberry Pi camera to the CSI interface of the Raspberry Pi, power on the Raspberry Pi again, and after the system [[File:5inch-DSI-LCD-3.gif]]

|caption=7 inch Capacitive Touch Screen LCD, HDMI interface, supports various systems 7 inch Capacitive Touch Screen LCD, HDMI interface, with a resolution of 800 × 480and a capacitive touch panel, which support

|caption=5 inch Resistive Touch Screen LCD, HDMI interface, supports various systems ''' Supported models: Support Waveshare DSI LCD, DPI LCD, and HDMI LCD capacitive touch screen series.'''

...to charge the GPM280 by connecting a 5V 3A power adapter to the Micro USB interface. The indicator lights will flash when charging, and the GPM280 supports cha fbcon=rotate:3 video=DSI-1:480x640M@60,rotate=90

|caption=480x800, 4inch IPS Display for Raspberry Pi, DPI interface, 5-points Touch. 480x800, 4inch IPS Display for Raspberry Pi, DPI interface, 5-points capacitive touch control.

|caption=800 x 480, 5inch IPS Display for Raspberry Pi, DPI interface, no Touch 800 x 480, 5inch IPS Display for Raspberry Pi, DPI interface, no Touch

{{FAQ|How to solve the abnormal BOOT interface when the Raspberry Pi 4B is connected?| '''Supported models: Support Waveshare DSI LCD, DPI LCD and HDMI LCD capacitive touch screen series.'''

*1-WIRE interface, for connecting single-bus devices like DS18B20. *Sensor interface.

|caption=1024 x 600, 7inch IPS Display for Raspberry Pi, DPI interface, no Touch 1024 x 600, 7inch IPS Display for Raspberry Pi, DPI interface, no Touch.

...ry Pi with a 6mm fixed-focus wide-angle lens, and a 4.3-inch 800x480 pixel DSI touch screen as the display screen. It is easy to assemble and more conveni ===4.3inch DSI LCD Parameters===

...ry Pi with a 6mm fixed-focus wide-angle lens, and a 4.3-inch 800x480 pixel DSI touch screen as the display screen. It is easy to assemble and more conveni ===4.3inch DSI LCD Parameters===

...oes not support switching. The following are the corresponding pins of the interface. <br> When using the camera and DSI, it will occupy three I2C devices: I2C-10, I2C-11, I2C-0<br>

...ss module. Also, it has multiple onboard interfaces, including M.2 / CSI / DSI / HDMI / eMMC / USB 3.0 / 40PIN GPIO / RJ45 Gigabit Ethernet port / TF card ...DSI × 1 (1080p@30fps);<br />4-lane MIPI DSI × 1 (2K@30fps);<br />Only one DSI port can be used for display at the same time.

|caption=3.5inch IPS Display for Raspberry Pi<br/>640 x 480, DPI interface, 5-points Touch 640 x 480, 3.5inch IPS Display for Raspberry Pi, DPI interface, 5-point capacitive touch control.

<font size = 3 >1. Connect 12/1A power adapter to the DC interface of the LCD, and you can see its backlight is on after the successful connec 2. Connect the TOUCH interface of the LCD to the USB interface of the PC. Waiting for a moment, The touch will be recognized by Windows au

|caption=5 inch Capacitive Touch Screen LCD, HDMI interface, supports various systems ...e Raspberry Pi to drive other high-power devices at the same time, the USB interface on the Raspberry Pi may be insufficiently powered, at this time an external

|caption=480 x 640, 2.8inch IPS Display for Raspberry Pi, DPI interface, 5-points Touch. 480 x 640, 2.8inch IPS Display for Raspberry Pi, DPI interface, 5-points capacitive touch control.

*Designed for Raspberry Pi, based on Raspberry Pi 40pin GPIO interface. *Using DPI666 interface of Raspberry Pi to drive LCD, refresh rate up to 60Hz.

| HDMI 2.0/DP1.2 | EDP 1.4 | DSI (1 x 2) 2 simultaneous |4||Type-C Interface||For Power Supply, Programming and Debugging

*HDMI interface (support 4K*2K@60) *40PIN GPIO Interface

...related to the Linux system (including those required to run the graphical interface), such as ls, mkdir, rm, etc. *Used to display the network configuration details of an interface on the current system when run with no arguments (ie) ifconfig.<br/>

<h4>Interface / Expansion</h4> {{Product Lists|Raspberry Pi/HATs/Interface-Expansion}}

Supported model: Support Waveshare DSI LCD, DPI LCD, and HDMI LCD capacitive touch series. *Make sure that the HDMI interface of the PC can output normally.

...he circular interface and do not need to use a jumper cap to short the J48 interface first. ...appearance and interface. It is suitable for users who do not require more interface resources. The core board of the Lite version also uses the Jetson Nano Mod

...''To test the Raspberry Pi camera, you need to connect an HDMI screen or a DSI screen to the Raspberry Pi'''</font><br/> ...the camera interface of the Raspberry Pi Zero series is next to the Power interface. If you are using a computing module, you must refer to the specific layout

<h4>Interface / Expansion</h4> {{Product Lists|Raspberry Pi/HATs/Interface-Expansion}}

...®️X3 PI is an embedded AI development board for ecological developers. The interface is compatible with Raspberry Pi, with 5 TOPS end-side reasoning and 4-core |Display interface||HDMI × 1 (up to 1920 × 1080);<br>MIPI-DSI × 1 (up to 1920 × 1080)

| 16 GB eMMC 5.1 Flash / M.2 M KEY NVME SSD Interface 1 x 2 DSI (1.5Gbps/channel) <br />