RP2040-One

From Waveshare Wiki
Jump to: navigation, search
RP2040-One
RP2040-One.jpg

RP2040
Type-A
{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Overview

Introduction

RP2040-One is a mini RP2040 development board. The onboard PCB USB-A connector makes it plug-and-play instantly. Mini body, 29 x multi-function GPIO pins (20 x via edge pinout, others via solder points), and the edge of the PCB adopt the castellated design, which can be easily and quickly integrated into your project.

Features

  • RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom.
  • Dual-core Arm Cortex M0+ processor, flexible clock running up to 133MHZ.
  • 246KB of SRAM, and 4MB of onboard Flash memory.
  • The castellated module allows soldering directly to carrier boards.
  • USB1.1 with device and host support.
  • Low-power sleep and dormant modes.
  • Drag-and-drop programming using mass storage over USB.
  • 29 x multi-function GPIO pins (20x via edge pinout, others via solder points).
  • 2 x SPI, 2 x UART, 4 x 12-bit ADC, 16 x controllable PWM channels.
  • Accurate clock and timer on-chip.
  • Temperature sensor.
  • Accelerated floating-point libraries on-chip.
  • 8 x Programmable I/O (PIO) state machines for custom peripheral support.

Pinout

RP2040-One Spec001.jpg

Dimensions

RP2040-One 05.jpg

Pico Quick Start

Download Firmware

  • MicroPython Firmware Download

MicroPython Firmware Download.gif

  • C_Blink Firmware Download

C Blink Download.gif

Video Tutorial

  • Pico Tutorial I - Basic Introduction

  • Pico Tutorial II - GPIO

  • Pico Tutorial III - PWM

  • Pico Tutorial IV - ADC

  • Pico Tutorial V - UART

  • Pico Tutorial VI - To be continued...

MicroPython Series

C/C++ Series

Arduino IDE Series

Install Arduino IDE

  1. Download the Arduino IDE installation package from Arduino website.
    RoArm-M1 Tutorial II01.jpg
  2. Just click on "JUST DOWNLOAD".
    Arduino IDE Pico.png
  3. Click to install after downloading.
    RoArm-M1 Tutorial II02.gif
  4. Note: You will be prompted to install the driver during the installation process, we can click Install.

Install Arduino-Pico Core on Arduino IDE

  1. Open Arduino IDE, click the File on the left corner and choose "Preferences".
    RoArm-M1 Tutorial04.jpg
  2. Add the following link in the additional development board manager URL, then click OK.
    https://github.com/earlephilhower/arduino-pico/releases/download/global/package_rp2040_index.json

    RoArm-M1 Tutorial II05.jpg
    Note: If you already have the ESP8266 board URL, you can separate the URLs with commas like this: 

    https://dl.espressif.com/dl/package_esp32_index.json,https://github.com/earlephilhower/arduino-pico/releases/download/global/package_rp2040_index.json
  3. Click on Tools -> Dev Board -> Dev Board Manager -> Search for pico, it shows installed since my computer has already installed it.
    Pico Get Start 05.png
    Pico Get Start 06.png

Upload Demo At the First Time

  1. Press and hold the BOOTSET button on the Pico board, connect the Pico to the USB port of the computer via the Micro USB cable, and release the button when the computer recognizes a removable hard drive (RPI-RP2).
    Pico Get Start.gif
  2. Download the demo, open arduino\PWM\D1-LED path under the D1-LED.ino.
  3. Click Tools -> Port, remember the existing COM, do not need to click this COM (different computers show different COM, remember the existing COM on your computer).
    UGV1 doenload02EN.png
  4. Connect the driver board to the computer with a USB cable, then click Tools -> Ports, select uf2 Board for the first connection, and after the upload is complete, connecting again will result in an additional COM port.
    UGV1 doenload03EN.png
  5. Click Tool -> Dev Board -> Raspberry Pi Pico/RP2040 -> Raspberry Pi Pico.
    Pico Get Start02.png
  6. After setting, click the right arrow to upload.
    Pico Get Start03.png
    • If you encounter problems during the period, you need to reinstall or replace the Arduino IDE version, uninstall the Arduino IDE needs to be uninstalled cleanly, after uninstalling the software you need to manually delete all the contents of the folder C:\Users\[name]\AppData\Local\Arduino15 (you need to show the hidden files in order to see it) and then reinstall.


Open Source Demo

Resource

Documents

Program

Official Documents

Official Raspberry Pi Documents

Raspberry Pi Open-source Program

Development Software

Support



Technical Support

If you need technical support or have any feedback/review, please click the Submit Now button to submit a ticket, Our support team will check and reply to you within 1 to 2 working days. Please be patient as we make every effort to help you to resolve the issue.
Working Time: 9 AM - 6 AM GMT+8 (Monday to Friday)

Retrieved from "https://www.waveshare.com/w/index.php?title=RP2040-One&oldid=69313"