Search results

|caption=PCF8574, I2C interface, 8-bit parallel port |interface1=I2C

...{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/lcd1602-i2c-module.htm}}]] *I2C interface, only two cables can be directly controlled, easy to access a variety of co

...azon|0}}| default|}}|url=link=http://www.waveshare.com/rpi-camera-v2.htm}}|RPi Camera V2]] |website_cn=[http://www.waveshare.net/shop/rpi-camera-v2.htm 网站]

|caption=A/D Converter & D/A Converter Module with I2C interface, PCF8591 on board, 8-bit resolution, 4 channel AD, 1 channel DA, voltage ou |interface1 = I2C

|caption=Serial Expansion HAT for Raspberry Pi, I2C Interface |interface1 = RPi

|caption=0.95inch RGB OLED, SPI interface, straight/vertical pinheader |interface1 = I2C

|caption=2-DOF Pan-Tilt HAT, I2C interfaces |interface1 = I2C

|caption=0.95inch RGB OLED, SPI interface, curved/horizontal pinheader |interface1 = I2C

|interface1=I2C |interface2=RPi

*Communication bus: 4-wire SPI/I2C |Pin||SPI Mode ||I2C Mode

|caption=RPI *Support I2C communication and a 16-bit counter.

|caption=PWM Controlled Fan HAT For Raspberry Pi, I2C Bus, PCA9685 Driver, Temperature Monitor |interface1=I2C

|interface4 = RPi *<AD/DA> PCF8591, 8-bit resolution, screw terminal IO interface.

|capation=4-ch Current/Voltage/Power Monitor HAT for Raspberry Pi, I2C/SMBus Interface |interface1=RPi

|caption=64×32<br/>0.49inch<br/>I2C *Communication interface: I2C

|caption=4inch Resistive Touch Screen LCD(C), HDMI interface, IPS Screen, Designed for Raspberry Pi |interface1 =USB/I2C

|caption=1.3inch OLED, SPI/I2C interfaces, curved/horizontal pin header |interface1 = I2C

|caption=1.3inch OLED, SPI/I2C interfaces, curved/horizontal pin header |interface1 = I2C

|caption=400 x 1280, RPI, DSI *DSI interface, refresh rate up to 60Hz.

|caption2=RPI/I2C |interface1=RPI I2C

...Pi reads/writes time information from DS3231 via I2C interface, so the I2C interface should be enabled. Select Advaced Options -> I2C -> <Yes>

|caption3=128 × 64, OLED, I2C SPI *Communication interface: 4-wire SPI / I2C

|interface5=I2C |interface8=RPi

*Support Interface: 4-wire SPI / I2C |I2C||1||1||0/1||SDA||SCL

...how to enable I2C function for Raspberry Pi and operate I2C devices using I2C-tools. == Enable I2C ==

|caption=128×64, I2C, SPI ...a 1.54-inch OLED module, a built-in SSD1309 driver chip, using the SPI/I2C interface communication, provides Raspberry Pi, Arduino, STM32, ESP32, Jetson Nano, a

|caption=1.69inch, 240 x 280, SPI, I2C ! class="tittle-bg width20percent" |Communication interface

|caption=RPI ...stable 5V voltage output. Also, you can monitor the parameters via the I2C interface, such as the battery voltage, current, and power. Supports displaying the b

|caption=1.28", 240x240<br/>SPI, I2C ! class="tittle-bg width20percent" | Communication interface

...face and allows using 4 expansion boards at the same time by modifying the i2c address, expanding up to 64 I/O ports.<br /> |Interface||I2C

|interface1 = RPi |interface2 = I2C

...9inch Touch EPD HAT For Raspberry Pi, 296 × 128 Pixels, Black / White, SPI Interface |interface2=RPi

|interface3 = I2C |interface6 = RPi

*I2C controlled, supports 32 x different I2C addresses by setting the 5 address jumpers. *Control interface: I2C

*Support interface: 4-wire SPI, 3-wire SPI '''PS: This module only has SPI interface, please pay attention when using it.'''

...3inch Touch EPD HAT For Raspberry Pi, 250 × 122 Pixels, Black / White, SPI Interface |interface2=RPi

|interface5 = I2C |interface9 = RPi

|caption=RPI, SPI, UART, I2C |interface1=RPi

|interface2=USB/I2C *Onboard dual touch circuit, optional USB Type-C or I2C touch, more application scenarios.<br/>

...591 features a 8-bit A/D converter and 4 D/A converters. Controlled by I2C interface. ...braries before trying these examples, see: '''[[Libraries Installation for RPi]]'''.

|interface5=I2C |interface8=RPi

|caption=0.96inch, 160*80<br/>ADC, I2C, GPIO ==Interface Description==

|interface1=RPi *RTC Communication Interface: I2C

|caption=480x800, 4inch IPS Display for Raspberry Pi, DPI interface, 5-points Touch. |interface1=RPi I/Os

|interface1=RPI I2C ...nboard four isolated RS485 interfaces, 100M+1000M dual network ports, HDMI interface, two CSI interfaces, two USB interfaces, etc...

|interface1=I2C ...ometer, magnetometer, barometer, temperature and humidity sensor, etc. I2C interface communication supports more external sensors. If you want to DIY the Raspbe

|interface5 = I2C |interface9 = RPi

|interface1=RPi I/Os *Designed for Raspberry Pi, based on Raspberry Pi 40pin GPIO interface.

1: Enable PCIe Interface: The PCIe interface is not enabled by default on PI5B. To enable it, add the following configur

|caption=1.5inch RGB OLED Module, I2C interfaces, |interface = SPI[[:interface:OLED|OLED]]

|interface1=RPi It is easy to control the 2-channel RS232 via SPI interface. With the advantages of fast communication, stability, reliability and safe

|caption3=GNSS<br/>UART/I2C | colspan="4"| Interface

|caption=DSI, CSI, micro HDMI, USB2.0/3.0 <br/>I2C, I2S, SPI, UART, RPi, Ethernet *2 × 4-lane MIPI DSI/CSI interface

|caption2=I2C, SPI<br/>128×64 ....42-inch OLED Module with an embedded SSD1309 driver chip and supports SPI/I2C communication. We also provide the demo codes for Raspberry Pi Pico, Ardui

|caption=3.5inch IPS Display for Raspberry Pi<br/>640 x 480, DPI interface, 5-points Touch |interface1=RPi I/Os

|interface1=RPI USB\SPI\I80 ...T for Raspberry Pi, 1600 × 1200 resolution, 16 grayscales, USB/SPI/I80/I2C interface.

|interface2=I2C *With a charging interface and automatic download circuit, you can use it while charging.

|SDA||P2||P8|| I2C SDA pin |SCL||P3||P9|| I2C SCL pin

*Directly drive LCD through Raspberry Pi's DSI interface, refresh rate up to 60Hz. Use a 15PIN FPC cable to connect the 2.8inch DSI LCD to the DSI interface of the Raspberry Pi.<br/>

|interface1 = RPi *The pinout is compatible with the Waveshare sensor interface standard, easy to connect various analog sensor modules.

|caption=480 x 640, 2.8inch IPS Display for Raspberry Pi, DPI interface, 5-points Touch. |interface1=RPi I/Os

|caption=320 x 1480, RPI, DSI *DSI interface, refresh rate up to 60Hz.

|caption=7inch capacitive Touch Screen LCD for Raspberry Pi<br/>DSI Interface, 1024 x 600 resolution *Drive the LCD directly through the DSI interface of the Raspberry Pi, with a refreshing rate of up to 60Hz.

|caption=400 x 1280, RPI, DSI *DSI interface, refresh rate up to 60Hz.

...receiver of the antenna on open-area outside</font>. Connect the micro USB interface to PC<br \> |SDA||P2||P8||SDA pin of I2C

*1-WIRE interface, for connecting single-bus devices like DS18B20. *Sensor interface.

...f the antenna on the open area outside</font>. Connect it to the micro USB interface and the PC.<br \> |SDA||P2||P8||SDA pin of I2C

|interface1=RPi It is easy to control the 2-channel RS485 for auto transceiving via SPI interface. Due to its fast communication, stability, reliability, and safety, it is

|interface2 = I2C 1.3inch LCD HAT, SPI/I2C interfaces

|caption2=1200 × 825, 9.7inch EPD HAT for Raspberry Pi, USB/SPI/I80/I2C interface |interface1=I2C

*Support interface: 4-wire SPI, 3-wire SPI '''PS: This module only has SPI interface, please pay attention when using it.'''

|caption2=1872 × 1404, 10.3inch EPD HAT for Raspberry Pi, USB/SPI/I80/I2C interface |interface1=I2C

|caption2=800x600, 6inch EPD HAT for Raspberry Pi, USB/SPI/I80/I2C interface |interface1=I2C

**2x I2C **[https://www.waveshare.com/wiki/Pico-Get-Start-RPI Pico-Get-Start-RPI]

|caption2=1872 × 1404, 7.8inch EPD HAT for Raspberry Pi, USB/SPI/I80/I2C interface |interface1=I2C

...pins with .c programs. See: [http://elinux.org/RPi_GPIO_Code_Samples#sysfs RPi GPIO Code Samples] ==== RPI.GPIO Installation ====

...®️X3 PI is an embedded AI development board for ecological developers. The interface is compatible with Raspberry Pi, with 5 TOPS end-side reasoning and 4-core |Display interface||HDMI × 1 (up to 1920 × 1080);<br>MIPI-DSI × 1 (up to 1920 × 1080)

*Support DSI display interface, high frame rate, and good compatibility with Raspberry Pi system. Connect the Raspberry Pi camera to the CSI interface of the Raspberry Pi, power on the Raspberry Pi again, and after the system

*Support DSI display interface, high frame rate, and good compatibility with Raspberry Pi system. Connect the Raspberry Pi camera to the CSI interface of the Raspberry Pi, power on the Raspberry Pi again, and after the system

...related to the Linux system (including those required to run the graphical interface), such as ls, mkdir, rm, etc. *Used to display the network configuration details of an interface on the current system when run with no arguments (ie) ifconfig.<br/>

*2 × I2C, 4 × 12-bit ADC. |style="background:green; color:white;text-align:center;"|Communication Interface

|caption=UART, RPI, USB *Communication Interface: UART, I2C