Difference between revisions of "USB TO TTL (B)"
m (Text replacement - "==Support==" to "") |
|||
Line 96: | Line 96: | ||
== <font color=red>Beware of knock-offs</font> == | == <font color=red>Beware of knock-offs</font> == | ||
{{Beware of knock-offs}} | {{Beware of knock-offs}} | ||
− | + | ||
{{Service00}} | {{Service00}} |
Revision as of 10:22, 6 June 2022
| ||
Introduction
Industrial USB TO TTL Converter, Original CH343G Onboard, Multi-Protection & Systems Support
Features
- Onboard resettable fuse and TVS diode, providing protections including over-current, over-voltage, backward-proof, and ESD protection, improving shock resistance, safe and stable communications
- Onboard IO protection circuit for surge suppress
- Onboard TTL serial port 3.3V and 5V voltage level switch, allows selecting TTL level
- 3x LED indicators for easily checking power connection and signal TX/RX statuses
- Quality plastic case with a dull-polish surface, well-crafted
- IDC connector with fool-proof design
Specifications
- Product category: Industrial USB TO TTL converter
- Host interface: USB
- Device interface: UART
- Communication range: 50bps ~ 6Mbps
- USB Device Interface:
- connector: USB Type-A;
- protection: resettable Fuse, ESD protection
- UART interface:
- connector: 6pin right-angle pinheader;
- protection: IO protection diode
- Indicator:
- PWR: power indicator, turns red when USB voltage is detected
- TXD: TX indicator, turns red while the USB port is sending data
- RXD: RX indicator, turns red while the device port is receiving data
Pinouts
PIN | Description |
VCC | 5V or 3.3V output for external device (configured by jumper) |
GND | Power gound |
TXD | Connects to MCU.RXD |
RXD | Connects to MCU.TXD |
RTS# | Connects to MCU.CTS |
CTS# | Connects to MCU.RTS |
About CH343
CH343 is a USB bus adapter chip, that realizes USB to a high-speed asynchronous serial port, and supports up to 115200bps communication Automatic identification and dynamic self-adaptation of baud rate, providing common MODEM contact signals for expanding asynchronous serial ports of computers, or feature USB bus for the common serial device or MCU.
How to use
Windows
For most of the PC, the driver for CH343 is CDC by default, if you need to use a VCP driver, please download the driver and install it manually.
The CH343 USB UART board use software flow control by default, if you want to use hardware flow control, connect CFG to EN for CDC mode, set in SSCOM software for VCP mode.
Linxu/Raspberry Pi
To work with Raspberry Pi, it is driver-free, just connect and check with the following command:
ls /dev/tty*
The port should be named as ttyACM0, user can use the minicom tool to test.
sudo apt-get install minicom -y minicom -D /dev/ttyACM0
MacOS
To use with MacOS, please download the driver and follow the guide
Android
To use with Android device, please donwnload the APP and test.
Resources
- CH343 Datasheet
- SSCOM software
- CH343 VCP driver for Windows
- CH343 driver for MacOS
- MacOS guide
- UART APP in Android
FAQ
Beware of knock-offs
Please note that we've found some poor copies of this item in the market. They are usually made of inferior materials and shipped without any testing.
You might be wondering if the one you're watching or you've purchased in other non-official stores is original, feel free to contact us.
Support
If you require technical support, please go to the Support page and open a ticket.