...ion of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable).
# Connect the HDMI Connector to both the HDMI interfaces on the LCD and the Pi.
9 KB (1,310 words) - 07:43, 20 October 2023
2: <font color="#ff0000">DSI interface is changed from DSI0 to DSI1, high resolution is supported</font><br>
1: <font color="#ff0000">DO NOT unplug any devices other than HDMI and USB when powering on.</font><br>
11 KB (1,717 words) - 10:10, 25 March 2024
|interface3 = micro HDMI
...rage drive. In this case, the Raspberry Pi 4 can be booted through the USB interface, which greatly improves the reading and writing speed and makes the boot sp
6 KB (958 words) - 09:49, 14 November 2023
|colspan=3 |1x Micro USB port (supports USB HUB expansion)
|colspan=3| Supports PAL and NTSC formats, supports HDMI (1.3 and 1.4) and supports PAL and NTSC formats from 640 x 350 to 1920 x 12
5 KB (720 words) - 03:35, 7 December 2023
|colspan=3 |1x Micro USB port (supports USB HUB expansion)
|colspan=3| Supports PAL and NTSC formats, supports HDMI (1.3 and 1.4) and supports PAL and NTSC formats from 640 x 350 to 1920 x 12
6 KB (811 words) - 03:33, 7 December 2023
|caption=DSI, CSI, micro HDMI, USB2.0/3.0 <br/>I2C, I2S, SPI, UART, RPi, Ethernet
*micro HDMI x 2 (support 4Kp60)
8 KB (1,186 words) - 02:09, 23 April 2024
<h4>Interface / Expansion</h4>
{{Product Lists|Raspberry Pi/HATs/Interface-Expansion}}
45 KB (5,211 words) - 06:31, 26 April 2022
*1-WIRE interface, for connecting single-bus devices like DS18B20.
*Sensor interface.
16 KB (2,597 words) - 08:37, 16 April 2024
...the EINK-DISP-103 (called "the display" hereafter) to the master device by HDMI cable. The display can only work with 1872x1404 resolution.
*Connect the 5V/3A power adapter to Power interface of the display.
9 KB (1,534 words) - 06:00, 4 September 2023
|interface3=HDMI
...h Raspberry Pi Compute Module 4. Although it is tiny, it can bring out the interface of Raspberry Pi Compute Module 4.
12 KB (1,959 words) - 06:57, 27 April 2024
*DSI interface is DSI1.
*Micro USB port is for power supply and for programming images USB SLAVE.
9 KB (1,367 words) - 08:05, 26 October 2023
...nboard four isolated RS485 interfaces, 100M+1000M dual network ports, HDMI interface, two CSI interfaces, two USB interfaces, etc...
#<font color=red>Do not plug and unplug any device except USB and HDMI when it is powered on.</font>
14 KB (2,119 words) - 03:25, 11 April 2024
#micro HDMI to HDMI cable
#Computer monitor or TV with HDMI interface (other interface monitors can use interface converter.)
9 KB (1,383 words) - 07:33, 1 September 2023
<h4>Interface / Expansion</h4>
{{Product Lists|Raspberry Pi/HATs/Interface-Expansion}}
55 KB (6,447 words) - 11:09, 28 April 2024
..., and click 'Write' to write the system image. (How to write an image to a micro SD card for your Pi? See [[RPi-Image-Installation-Guides|RPi Image Installa
...og in to the Raspberry Pi terminal,(You may need to connect a keyboard and HDMI LCD to Pi for driver installation, or log in remotely with SSH).
16 KB (2,375 words) - 11:56, 2 January 2024
..., and click 'Write' to write the system image. (How to write an image to a micro SD card for your Pi? See [[RPi-Image-Installation-Guides|RPi Image Installa
...og in to the Raspberry Pi terminal,(You may need to connect a keyboard and HDMI LCD to Pi for driver installation, or log in remotely with SSH).
16 KB (2,408 words) - 06:52, 4 September 2023
..., and click 'Write' to write the system image. (How to write an image to a micro SD card for your Pi? See [[RPi-Image-Installation-Guides|RPi Image Installa
...og in to the Raspberry Pi terminal,(You may need to connect a keyboard and HDMI LCD to Pi for driver installation, or log in remotely with SSH.)
16 KB (2,409 words) - 11:55, 2 January 2024
..., and click 'Write' to write the system image. (How to write an image to a micro SD card for your Pi? See [[RPi-Image-Installation-Guides|RPi Image Installa
...g in to the Raspberry Pi terminal, (You may need to connect a keyboard and HDMI LCD to Pi for driver installation, or log in remotely with SSH).
16 KB (2,507 words) - 09:09, 6 February 2024
...and click 'Write' to write the system image. ( How to write an image to a micro SD card for your Pi? See [[RPi-Image-Installation-Guides|RPi Image Installa
...og in to the Raspberry Pi terminal,(You may need to connect a keyboard and HDMI LCD to Pi for driver installation, or log in remotely with SSH).
17 KB (2,563 words) - 07:27, 24 February 2024
..., and click 'Write' to write the system image. (How to write an image to a micro SD card for your Pi? See [[RPi-Image-Installation-Guides|RPi Image Installa
...og in to the Raspberry Pi terminal,(You may need to connect a keyboard and HDMI LCD to Pi for driver installation, or log in remotely with SSH.)
16 KB (2,442 words) - 09:36, 6 February 2024
...recommend our [https://www.waveshare.com/catalogsearch/result/?q=HDMI+LCD HDMI display]), keyboard and Mouse to Jetson Nano Developer Kit
*If you have an HDMI screen, keyboard and mouse, etc., plug the device into the jetson nano.
10 KB (1,601 words) - 09:06, 20 October 2023
*Compatible with Raspberry Pi A+/B+/2B/3B/3B+4B (external HDMI adapter is required for Pi Zero/Zero W/Zerao WH).
# Connect to the HDMI port. Connect the HDMI connector to the HDMI interface of the screen and the board.
16 KB (2,475 words) - 08:23, 15 March 2024
===Interface Options===
*A4 Network Interface Names: Switch the network card naming rules.
22 KB (3,537 words) - 06:40, 2 September 2023
1. <font color=red>Do not plug and unplug any device except USB and HDMI while the baseboard is working.</font><br>
...USB SLAVE interface is used to burn the image and cannot be used as an OTG interface.<br>
13 KB (2,002 words) - 10:32, 25 March 2024
|caption=RP2040<br/>Micro SD, DVI, USB Type-C
...effective microcontroller board designed by Waveshare, with an onboard DVI interface, TF card slot, and PIO-USB port, compatible with Raspberry Pi 40PIN GPIO he
9 KB (1,318 words) - 01:30, 25 January 2024
...a variety of peripheral interfaces such as USB connectors, Ethernet port, HDMI port, CSI, GPIO, I2C, and RS485 interfaces. Onboard M.2 B KEY slot with ada
| HDMI 2.0/DP1.2 | EDP 1.4 | DSI (1 x 2) 2 simultaneous
15 KB (2,402 words) - 05:53, 18 April 2024
...he circular interface and do not need to use a jumper cap to short the J48 interface first.
...appearance and interface. It is suitable for users who do not require more interface resources. The core board of the Lite version also uses the Jetson Nano Mod
23 KB (3,763 words) - 02:18, 23 December 2023
|interface3 = HDMI
...also be used as the power supply interface, but cannot be used as the OTG interface.<br />
12 KB (2,000 words) - 10:15, 25 March 2024
*DSI interface, refresh rate up to 60Hz.
# Connect the 7inch DSI LCD (C) (display hereafter) to the DSI interface of Raspberry Pi boards by 15PIN FPC cable.
13 KB (1,978 words) - 06:03, 4 September 2023
*DSI interface, refresh rate up to 60Hz.
1. Use a 15PIN FPC cable to connect the display DSI interface to the DSI interface of the Raspberry Pi board.<br/>
17 KB (2,631 words) - 01:20, 26 March 2024
*DSI interface, refresh rate up to 60Hz.
...IN FPC cable to connect the DSI interface of the display screen to the DSI interface of the Raspberry Pi board.<br>
17 KB (2,720 words) - 06:46, 25 March 2024
*HDMI interface (support 4K*2K@60)
*40PIN GPIO Interface
18 KB (3,036 words) - 09:31, 4 January 2024
...generation for multiple concurrent AI inference pipelines, with high-speed interface support for multiple sensors, it is an ideal solution for a new age of robo
...Orin NX 8GB/16GB DEV KIT provides rich peripheral interfaces such as M.2, HDMI, USB, etc., which is more convenient for users to realize the product perfo
9 KB (1,332 words) - 10:11, 22 March 2024
*Onboard CAN controller MCP2515 via SPI interface, matching with SIT65HVD230DR transceiver.
#Micro USB cable.
8 KB (1,312 words) - 01:26, 17 April 2024
|caption=M.2 B KEY, CSI HDMI, USB 2.0, Ethernet, FAN, 4G, 5G
...h a UPS module, which features common interfaces such as Gigabit Ethernet, HDMI, USB, and GPIO, allowing additional 4G / 5G wireless communication modules
23 KB (3,628 words) - 08:41, 27 March 2024
...®️X3 PI is an embedded AI development board for ecological developers. The interface is compatible with Raspberry Pi, with 5 TOPS end-side reasoning and 4-core
|Display interface||HDMI × 1 (up to 1920 × 1080);<br>MIPI-DSI × 1 (up to 1920 × 1080)
62 KB (10,025 words) - 12:04, 30 April 2024
| 16 GB eMMC 5.1 Flash / M.2 M KEY NVME SSD Interface
2 x Multimode DP 1.4/eDP 1.4/HDMI 2.0 <br />
60 KB (9,448 words) - 06:50, 4 September 2023
| 16 GB eMMC 5.1 Flash / M.2 M KEY NVME SSD Interface
2 x Multimode DP 1.2/eDP 1.4/HDMI 2.0 <br />
62 KB (9,955 words) - 01:32, 19 March 2024
...ed by Waveshare based on the Jetson Xavier NX core board, whose peripheral interface, size, and thickness are almost the same as Jetson Xavier NX Developer Kit,
| 16 GB eMMC 5.1 Flash / M.2 M KEY NVME Solid State Interface
59 KB (9,368 words) - 08:31, 26 December 2023
...he circular interface and do not need to use a jumper cap to short the J48 interface first.
#USB data cable (Micro USB port, can transfer data)
79 KB (12,782 words) - 05:57, 18 April 2024
