Raspberry Pi Zero W Package E

From Waveshare Wiki
Jump to: navigation, search
Raspberry Pi Zero Package E
Raspeberry Pi Zero W Package E
Raspberry Pi Zero WH Package E

{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Primary Attribute
Category: Raspberry Pi
{{{userDefinedInfo}}}: {{{userdefinedvalue}}}
Brand: Raspberry Pi
Website
International: Waveshare website
Chinese: 官方中文站点
Onboard Interfaces
Related Products

Instroduction

The Raspberry Pi Zero is half the size of a Model A+, with twice the utility. A tiny Raspberry Pi that’s affordable enough for any project!

Note: this is the original Pi Zero V1.3, for the new version with built-in WiFi, please check

Difference among Zero, Zero W, and the Zero WH

The Raspberry Pi Zero is the basic version of the Raspberry Pi Zero series without WiFi and Bluetooth functions. The Raspberry Pi WH has a wireless card featuring WiFI and Bluetooth functions. The Raspberry Pi Zero WH version has a pre-soldered 40PIN pin-header based on the Raspberry Pi W for easy use.

Raspberry Pi Features

  • Broadcom BCM2835
    • 1GHz ARM11 single-core processor
  • 512MB RAM
  • Micro SD card slot
  • Mini-HDMI port (1080p60 video output)
  • Micro-USB power
  • Micro-USB OTG port
  • 40PIN unpopulated GPIO header (compatible with A+/B+/2B/3B)
  • CSI camera connector
  • Composite video header
  • Composite reset header
  • Dimension: 65mm x 30mm x 5mm

Raspberry Pi Zero vs Raspberry Pi W

The Raspberry Pi W has a wireless card, which supports WiFi and Bluetooth.

Zero vs Zero W.png

2.13inch e-Paper HAT (B)

Features

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra-low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs]

Specification

  • Operating voltage: 3.3V/5V
  • Interface: 3-wire SPI, 4-wire SPI
  • Outline dimension: 65mm × 30.2mm
  • Display size: 23.71mm × 48.55mm
  • Dot pitch: 0.229 × 0.228
  • Resolution: 212 × 104
  • Display color: red, black, white
  • Grey level: 2
  • Full refresh time: 15s
  • Refresh power: 26.4mW(typ.)
  • Standby power: <0.017mW
  • Viewing angle: >170°

For more information about the 2.13inch e-Paper HAT (B), please refer to the wiki of the 2.13inch e-Paper HAT (B)

General Tutorial Series

FAQ

Support

If you require technical support, please go to the Support page and open a tickets.