4inch HDMI LCD, 800x480, IPS

SKU: 12030
Part Number: 4inch HDMI LCD
Brand: Waveshare
UPC: 614961950160

$41.99
Predicted shipping date: mid June, 2020
$39.0510+
$37.5850+
$36.99100+

Description

Details

This display is currently in short supply. For bulk purchase, the 4inch HDMI LCD (H) is recommended as substitute.

800x480, 4inch Resistive Touch Screen LCD, HDMI interface, IPS Screen, Designed for Raspberry Pi

Features

  • 800x480 high hardware resolution
  • Resistive touch control
  • IPS technology, high quality and perfect displaying from very wide viewing angle
  • Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable)
  • Drivers provided (works with your own Raspbian/Ubuntu/Kali/Retropie)
  • Also works as a computer monitor, in this case, touch panel is unavailable and HDMI cable is required
  • HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os)
  • Backlight can be turned off to lower power consumption

Photos

Interface

PIN NO. SYMBOL DESCRIPTION
1, 17 3.3V Power positive (3.3V power input)
2, 4 5V Power positive (5V power input)
3, 5, 7, 8, 10, 11, 12, 13, 15, 16, 18, 24 NC NC
6, 9, 14, 20, 25 GND Ground
19 TP_SI SPI data input of Touch Panel
21 TP_SO SPI data output of Touch Panel
22 TP_IRQ Touch Panel interrupt, low level while the Touch Panel detects touching
23 TP_SCK SPI clock of Touch Panel
26 TP_CS Touch Panel chip selection, low active

External Dimension

4inch-HDMI-LCD-dimension

Development Resources

Wiki : www.waveshare.com/wiki/4inch_HDMI_LCD

FAQ

Why the LCD doesn't work with my Raspbian?
To use the LCD with the Raspberry Pi official image, driver (SPI touch interface only) should be installed first. Please refer to the user manual.
However, for the first testing, you may want to use our image directly (if provided).
Why the LCD still doesn't work with the Waveshare provided image?
Make sure the hardware connection is correct and connects fine.
Make sure the image in TF card is burnt correctly.
The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact.
Which power supply should I use?
It is recommended to use a 5V/3A power adapter for the Raspberry Pi other than USB connection, otherwise the Pi may failed to start up because the PC's USB port might have not enough power.
For large size LCDs, say, 10inch diagonal or more, another stand-alone power adapter is also required to provide power to the LCD.

For more info, please check the wiki page.

Selection Guide

PartNumber Display Touch Audio Device Support
Resolution Display Port Display Panel View Angle Touch Type Touch Port Touch Panel Spe-
aker
Signal Output Pi JETSON NANO PC
GPIO Displays
3.2inch RPi LCD (C) 320×240 High-Speed SPI TFT Resistive SPI × × × ×
3.5inch RPi LCD (B) 480×320 SPI IPS 160° Resistive SPI × × × ×
3.5inch RPi LCD (C) 480×320 High-Speed SPI TFT Resistive SPI × × × ×
4inch RPi LCD (C) 480×320 High-Speed SPI TFT Resistive SPI × × × ×
HDMI / TYPE-C Displays
3.5inch HDMI LCD 480×320 HDMI IPS 160° Resistive SPI × × Display ONLY
4inch HDMI LCD 480×800 HDMI IPS 170° Resistive SPI × × × Display ONLY
4inch HDMI LCD (H) 480×800 HDMI IPS 170° Resistive SPI × × Display ONLY
4.3inch HDMI LCD (B) 800×480 HDMI IPS 160° Capacitive USB ×
4.3inch DSI LCD 800×480 DSI IPS 160° Capacitive I2C Toughened Glass × × × ×
5inch DPI LCD 800×480 DPI IPS 160° × × × × × × ×
5inch HDMI LCD 800×480 HDMI TFT Resistive SPI × × × ×
5inch HDMI LCD (with case) 800×480 HDMI TFT Resistive SPI × × × ×
5inch HDMI LCD (B) 800×480 HDMI TFT Resistive USB × × ×
5inch HDMI LCD (B) (with case) 800×480 HDMI TFT Resistive USB × × ×
5inch HDMI LCD (G) 800×480 HDMI/VGA TFT Resistive USB × ×
5inch HDMI LCD (H) 800×480 HDMI/VGA TFT Capacitive USB Toughened Glass ×
5.5inch HDMI AMOLED 1080×1920 HDMI AMOLED 170° Capacitive USB Toughened Glass ×
5.5inch HDMI AMOLED (with case) 1080×1920 HDMI AMOLED 170° Capacitive USB Toughened Glass × × ×
7inch DPI LCD 1024×600 DPI IPS 170° × × × × × × ×
7inch HDMI LCD 1024×600 HDMI IPS 170° Resistive SPI × × × Display ONLY
7inch HDMI LCD (B) 800×480 HDMI TFT Capacitive USB × × ×
7inch HDMI LCD (B) (with case) 800×480 HDMI TFT Capacitive USB × × ×
7inch HDMI LCD (C) 1024×600 HDMI IPS 170° Capacitive USB × × ×
7inch HDMI LCD (C) (with case) 1024×600 HDMI IPS 170° Capacitive USB × × ×
7inch HDMI LCD (H) 1024×600 HDMI/VGA IPS 170° Capacitive USB ×
7inch HDMI LCD (H) (with case) 1024×600 HDMI/VGA IPS 170° Capacitive USB Toughened Glass ×
7inch FHD Monitor 1080×1920 HDMI IPS 170° Capacitive USB Toughened Glass
7.9inch HDMI LCD 400×1280 HDMI IPS 170° Capacitive USB Toughened Glass ×
10.1inch HDMI LCD 1024×600 HDMI IPS 170° Resistive SPI × × × Display ONLY
10.1inch HDMI LCD (H) (with case) 1024×600 HDMI/VGA TFT Capacitive USB × ×
10.1inch HDMI LCD (B) (with case) 1280×800 HDMI IPS 170° Capacitive USB Toughened Glass × × ×
11.6inch HDMI LCD (H) (with case) 1920×1080 HDMI/VGA IPS 178° Capacitive USB Toughened Glass
12.5inch FHD Monitor 1920×1080 HDMI/Type-C IPS 178° Capacitive Type-C / USB Toughened Glass
13.3inch HDMI LCD (H) 1920×1080 HDMI IPS 178° Capacitive USB Toughened Glass ×
13.3inch HDMI LCD (H) (with case) 1920×1080 HDMI/VGA IPS 178° Capacitive USB Toughened Glass
13.3inch HDMI LCD (H) (with case) V2 1920×1080 HDMI/VGA IPS 178° Capacitive USB Toughened Glass
15.6inch HDMI LCD (H) (with case) 1920×1080 HDMI/VGA IPS 178° Capacitive USB Toughened Glass
15.6inch FHD Monitor 1920×1080 HDMI/Type-C IPS 178° Capacitive Type-C / USB Toughened Glass

Have a look :
RPi LCD Comparing

Weight: 0.09 kg

Quick Overview

  1. 4inch HDMI LCD x1
  2. HDMI connector x1
  3. HDMI to micro HDMI connector x1
  4. Touch pen x1
  5. RPi screws pack (4pcs) x1
  6. Quick start sheet x1
1
2
3
4
5
6