Core103Z

Core103Z STM32F1 Core Board STM32 small board with the STM32F103ZET6 MCU, full IO expander, JTAG/SWD debug interface

{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Primary Attribute Category: STM32 Development Boards {{{userDefinedInfo}}}: {{{userdefinedvalue}}} Brand: Waveshare

Website International: Waveshare website Chinese: 官方中文站点

Onboard Interfaces JTAG/SWD USB

Related Products Core103Z Open103Z ST-LINK/V2 (EN) ST-LINK/V2 (CN) ST-LINK ST-LINK/V2 (mini) STLINK-V3MINI ARM Debugger STX-RLINK

Introduction

STM32 small board with the STM32F103ZET6 MCU, full IO expander, JTAG/SWD debug interface

More

Resources

• Schematic
• Demo

STM32 Software

IDE

• Keil MDK
• STM32CubeMX

Programmers

• Flash Loader for ISP
• STVP
• STM32 ST LINK Utility

USB Driver

• PL2303 Windows Driver
• ST-Link V2 USB Driver
• Virtual_COM_Port_Driver

Other Software

• Stlinkupgrade
• TCP UDP Debugger
• IpTool
• EMWToolBox_Setup
• BonjourSetup
• SecureCRT
• Camera test
• BusHound

STM32F1 Datasheets

• STM32F101-Datasheet.pdf
• STM32F103X8.B-Datasheet.pdf
• STM32F103XC.D.E-Datasheet.pdf
• STM32F105_STM32F107-Datasheet.pdf
• STM32F1-Reference.pdf

Related Resources

Cortex M3 Guide

• Cortex-M3 Technical Reference Manual
• Cortex-M3 Definitive Guide

ST libraries

• STM32F10x_StdPeriph_Lib.7z
• STM32_F105-07_F2xx_USB-Host-Device_Lib.7z
• STM32F1_FWLib_manual.pdf
• STM32_I2C_CPAL.7z

Keil Device Package

www.keil.com/dd2/pack/

UCOS Source

• UCGUI3.90_Source.zip

FAQ

Question: Using the sample demo of '30.Touch' can not work?

Answer: Use the following routines if using the 7inch Capacitive Touch LCD (F) GT911 version: TOUCH 1024x600 GT911 Demo Code Use the following routines if using the 4.3inch Capacitive Touch LCD GT911 version: 4.3inch Capacitive Touch LCD Demo Code

Support

Please contact us by Email/Skype/WeChat for technology support.Our response may be delay, you can just leave your questions, we will reply to you as soon as possible in working time.

	[email protected]
	[email protected]
	09:00 - 18:00 (UTC+8 Monday to Staturday)