Template: 2.9inch e-Paper Module (B) arduino
From Waveshare Wiki
Revision as of 06:13, 2 September 2023 by Waveshare-admin (talk | contribs) (Text replacement - "https://www.waveshare.com/w/upload/" to "https://files.waveshare.com/upload/")
Working With Arduino
Hardware Connection
Use an 8PIN cable to connect, please refer to the pin correspondence table below:
e-Paper | Arduino UNO | Mega2560 |
VCC | 5V | 5V |
GND | GND | GND |
DIN | D11 | D51 |
CLK | D13 | D52 |
CS | D10 | D10 |
DC | D9 | D9 |
RST | D8 | D8 |
BUSY | D7 | D7 |
Install IDE
Run The Demo
- Download the demo in Resource, unzip it to the "E-Paper_code" directory, and you can see the following content:
- Open the test demo: E-Paper_code\Arduino\epd2in9b_V3\epd2in9b_V3.ino
- Select the corresponding Board and Port in the Tools in the Arduino IDE.
- Finally, click upload, the upload is successful as follows (Arduino 1.8.13).