RP2350 2.41inch AMOLED Touch Display Development Board, 450 × 600 Pixels, QSPI Interface, Dual-core & Dual-architecture Design, Accelerometer And Gyroscope Sensor

$46.99 - $49.99

Details

RP2350 2.41inch AMOLED Touch Display Development Board, 450 × 600 Pixels, QSPI Interface, Dual-core & Dual-architecture Design, Accelerometer And Gyroscope Sensor
RP2350 2.41inch AMOLED touch display
development board

450 × 600 resolution, onboard multiple peripheral interfaces

RP2350-Touch-AMOLED-2.41 AMOLED Touch Display Development Board, front view
version options
RP2350-Touch-AMOLED-2.41

RP2350-Touch-AMOLED-2.41
Standard version, without case

RP2350-Touch-AMOLED-2.41-B

RP2350-Touch-AMOLED-2.41-B
with protective case

Features

RP2350-Touch-AMOLED-2.41 is a high-performance, highly integrated MCU board designed by Waveshare. It features a compact size with an onboard 2.41inch AMOLED capacitive touch display, RTC chip, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), TF card slot and so on, making it easy to develop and integrate into products quickly.

  • RP2350B microcontroller chip designed by Raspberry Pi in the United Kingdom
  • Adopts unique dual-core and dual-architecture design: dual ARM Cortex-M33 or dual Hazard3 RISC-V processors support, flexible clock running up to 150 MHz
  • 520KB of SRAM, 16MB onboard Flash memory and 2MB PSRAM
  • Type-C connector for easier use
  • Onboard 2.41inch AMOLED capacitive touch display for clear color picture display, 450 × 600 resolution, 16.7M color
  • Built-in RM690B0 display driver and FT6336 capacitive touch chip, using QSPI and I2C communication respectively
  • Lithium battery recharge/discharge header, suitable for mobile applications
  • USB 1.1 with device and host support
  • Low-power sleep and dormant modes
  • Drag-and-drop programming using mass storage over USB
  • Adapting 21 × multi-function GPIO pins
  • 2 × I2C, 2 × UART, 6 × 12-bit ADC, 15 × controllable PWM channels
  • Accurate clock and timer on-chip
  • Temperature sensor
  • Accelerated floating-point libraries on-chip
  • 12 × Programmable I/O (PIO) state machines for custom peripheral support


AMOLED display parameters
Display Panel AMOLED Display Size 2.41inch
Resolution 450 × 600 pixels Display Colors 16.7M
Brightness 800 cd/㎡ Contrast Ratio 100000:1
Communication Interface QSPI Driver IC RM690B0
Touch Supported Touch IC FT6336

Adopts AMOLED display

The next-generation display technology, compared to traditional LCD displays, the AMOLED screen features precise light-control capability, representing more delicate colors, more picture details, and more vivid images

RP2350-Touch-AMOLED-2.41 AMOLED display introduction
178° wide viewing angle

Excellent Display Performance, 16.7M color, wide viewing angle

RP2350-Touch-AMOLED-2.41 178° wide viewing angle
dual-core, dual-architecture

The unique dual-core, dual-architecture capability of RP2350B allows users to choose between a pair of industry-standard Arm Cortex-M33 cores, and a pair of open-hardware Hazard3 cores, giving developers a chance to experiment with the RISC-V architecture in a stable, well-supported environment

RP2350-Touch-AMOLED-2.41 dual-core, dual-architecture

Supports C/C++, MicroPython, Arduino IDE

Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started


What's On Board

RP2350-Touch-AMOLED-2.41

RP2350-Touch-AMOLED-2.41 resources introduction

RP2350-Touch-AMOLED-2.41-B

RP2350-Touch-AMOLED-2.41-B resources introduction

Pin Definition

adapting multiple GPIO interfaces, more convenient for development, offers strong flexibility

RP2350-Touch-AMOLED-2.41 Pin Definition RP2350-Touch-AMOLED-2.41 Pin Definition

Outline dimensions

RP2350-Touch-AMOLED-2.41

RP2350-Touch-AMOLED-2.41 Outline dimensions

RP2350-Touch-AMOLED-2.41-B

RP2350-Touch-AMOLED-2.41-B Outline dimensions
Pico Product Selection
PRODUCT Voltage regulator chip USB Flash Lithium battery header Onboard LCD
RP2350 chip

Raspberry Pi Pico 2
DC-DC, 800mA Micro USB 4MB - -

Raspberry Pi Pico 2 W
DC-DC, 800mA Micro USB 4MB - with WIFI and Bluetooth

Raspberry Pi Pico 2 WH
DC-DC, 800mA Micro USB 4MB - with WIFI and Bluetooth

CAN ver.
DC-DC, 2000mA Type-C 4MB - CAN interface

Type-A ver.
LDO, 500mA Type-A 4MB - -

Type-C ver.
LDO, 800mA Type-C 4MB - -

PIO-USB ver.
LDO, 500mA Type-C 2MB - with PIO-USB Type-C female port

Tiny ver.
LDO, 800mA Separate Type-C port adapter 4MB - Separate adapter board design, adapting USB Type-C port via FPC

RGB Matrix ver.
LDO, 800mA Type-C 16MB - Onboard 8 x 8 RGB LED Matrix

ETH Port ver.
LDO, 800mA Type-C 4MB - with Ethernet port

USB ver.
LDO, 500mA Type-A, Type-C 2MB - with PIO-USB Type-A and USB Type-C port

core board
LDO, 800mA Separate Type-C port adapter 16MB - -

wireless Plus ver.
LDO, 800mA Type-C 16MB - Supports Wi-Fi and Bluetooth

1.43inch Round Touch AMOLED ver.
DC-DC, 2000mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 1.43inch AMOLED Touch LCD

1.64inch Touch AMOLED ver.
DC-DC, 2000mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 1.64inch AMOLED Touch LCD

1.75inch Round Touch AMOLED ver.
DC-DC, 2000mA
LDO,300mA
Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 1.75inch AMOLED Touch LCD

1.8inch Touch AMOLED ver.
DC-DC, 2000mA
LDO,300mA
Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 1.8inch AMOLED Touch LCD

2.41inch Touch AMOLED ver.
DC-DC, 2000mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 2.41inch Touch AMOLED

0.85inch LCD ver.
DC-DC, 2000mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 0.85inch IPS LCD

0.96inch LCD ver.
DC-DC, 2000mA Type-C 4MB Support(allows recharging the battery and powering the board at the same time) 0.96inch IPS LCD

1.28inch Round LCD ver.
LDO, 300mA Type-C 4MB Support(allows recharging the battery and powering the board at the same time) 1.28inch IPS LCD

1.28inch Round Touch LCD ver.
LDO, 300mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 1.28inch IPS touch LCD

1.46inch Round Touch ver.
DC-DC, 2000mA Type-C 16MB - 1.46inch touch LCD

1.47inch LCD ver.
LDO, 300mA Type-C 16MB - 1.47inch IPS LCD

1.47inch LCD USB ver.
LDO, 300mA Type-A 16MB - 1.47inch IPS LCD

1.54inch LCD ver.
DC-DC, 2000mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 1.54inch IPS LCD

1.54inch Touch LCD ver.
DC-DC, 2000mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 1.54inch IPS Touch LCD

1.69inch Touch LCD ver.
LDO, 500mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 1.69inch Touch LCD

1.85inch Round Touch LCD ver.
DC-DC, 2000mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 1.85inch Touch LCD

2inch Touch LCD ver.
DC-DC, 2000mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 2inch Touch LCD

2.1inch Round Touch LCD ver.
LDO, 800mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 2.1inch Touch LCD

2.1inch Round Curved Touch LCD ver.
LDO, 800mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 2.1inch 2.5D Curved Touch LCD

2.8inch Touch LCD ver.
LDO, 800mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 2.8inch IPS Touch LCD

2.8inch Round Touch LCD ver.
LDO, 800mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 2.8inch IPS Touch LCD, RGB interface

3.49inch Touch LCD ver.
DC-DC, 2000mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 3.49inch IPS Touch LCD

3.5inch Touch LCD ver.
DC-DC, 2000mA
LDO, 300mA
Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 3.5inch Touch LCD

4inch LCD ver.
LDO, 800mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 4inch IPS LCD, RGB interface

4inch Touch LCD ver.
LDO, 800mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 4inch IPS Touch LCD, RGB interface

4.3inch Touch LCD ver.
LDO, 800mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 4.3inch IPS Touch LCD, RGB interface

7inch Touch LCD ver.
DC-DC, 3000mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 7inch IPS Touch LCD, RGB interface

7inch LCD ver.
DC-DC, 3000mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 7inch IPS LCD, RGB interface

1.54inch e-Paper ver.
DC-DC, 2000mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 1.54inch e-Paper display

1.54inch touch e-Paper ver.
DC-DC, 2000mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 1.54inch touch e-Paper display

Plus ver.
DC-DC, 2000mA Type-C 4MB/16MB Support(allows recharging the battery and powering the board at the same time) -

DVI port ver.
DC-DC, 2000mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) Onboard DVI interface, TF card slot and PIO-USB port
RP2040 chip

Raspberry Pi Pico W
DC-DC, 3000mA Micro USB 2MB - with WIFI

Raspberry Pi Pico WH
DC-DC, 3000mA Micro USB 2MB - with WIFI

Raspberry Pi Pico
DC-DC, 800mA Micro USB 2MB - -

Raspberry Pi Pico H
DC-DC, 800mA Micro USB 2MB - -

Type-A ver.
LDO, 500mA Type-A 4MB - -

Mini ver.
LDO, 800mA Type-C 2MB - -

Tiny ver.
LDO, 500mA Separate Type-C port adapter 2MB - Separate adapter board design, adapting USB Type-C port via FPC

RGB Matrix ver.
LDO, 500mA Type-C 2MB - Onboard 5×5 RGB LED matrix

BLE ver.
LDO, 300mA Separate Type-C port adapter 2MB - Supports Bluetooth 5.1, separate adapter board design, adapting USB Type-C port via FPC

ETH Port ver.
LDO, 500mA Type-C 4MB - with Ethernet port

0.99inch Round LCD with case ver.
LDO, 500mA Type-C 2MB - 0.99inch IPS LCD, CNC metal case

1.28inch Round LCD ver.
LDO, 300mA Type-C 2MB Support(allows recharging the battery and powering the board at the same time) 1.28inch IPS LCD

1.28inch Round LCD with case ver.
LDO, 300mA Type-C 2MB Support(allows recharging the battery and powering the board at the same time) 1.28inch IPS LCD, CNC metal case

1.28inch Round Touch LCD ver.
LDO, 500mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 1.28inch Touch LCD

1.28inch Round Touch LCD with case ver.
LDO, 500mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 1.28inch Touch LCD, CNC metal case

1.69inch Touch LCD ver.
LDO, 500mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 1.69inch Touch LCD

1.85inch Touch LCD ver.
DC-DC, 2000mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 1.85inch Touch LCD

0.96 LCD ver.
DC-DC, 1800mA Type-C 2MB Support(allows recharging the battery and powering the board at the same time) 0.96inch IPS LCD

Plus ver.
DC-DC, 1800mA Type-C 4MB/16MB Support(allows recharging the battery and powering the board at the same time) -

DVI port ver.
LDO, 300mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) Onboard DVI interface, TF card slot and PIO-USB port

Cam & LCD ver.
- Type-C 16MB - Onboard grayscale camera and 1.14inch IPS LCD display

Quick Overview

RP2350-Touch-AMOLED-2.41

  1. RP2350-Touch-AMOLED-2.41 × 1
  2. SH1.0 4PIN cable × 2
1RP2350-Touch-AMOLED-2.41
2

RP2350-Touch-AMOLED-2.41-B

  1. RP2350-Touch-AMOLED-2.41-B × 1
  2. SH1.0 4PIN cable × 2
1RP2350-Touch-AMOLED-2.41-B
2