- Description
- Package Content
Details
Support SIMCom & Quectel 5G Module

- Support 5G modules with M.2 (NGFF) Key B interface, compatible with SIMCom and Quectel 5G modules
- Support 5G modules with 3042/3052 form factor, such as SIM82XX, and RM50XQ series 5G modules
- USB 3.1 Type A port for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 5G network
- 4x SMA antenna connectors, easy to install the antenna
- Onboard SIM card slot for NANO SIM card
- Onboard power and network indicators, with multiple reserved pads, for checking module operating status and testing other functions
- PCB ENIG process, reserved multi slots and positioning holes for integration
- Comes with customized aluminum alloy heatsink, good heat dissipation, nice-looking, protective and durable
SIM8202G-M2 | SIM8262E-M2 | SIM8262A-M2 | RM500Q-GL | RM502Q-AE | RM520N-GL | |
---|---|---|---|---|---|---|
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
5G Standard | 3GPP R15 | 3GPP R16 | 3GPP R15 | 3GPP R16 | ||
Region / Provider | except Americas | Americas | Global (except US) | Global (except China) | Global | |
CHIP | Qualcomm Snapdragon X55 | Qualcomm Snapdragon X62 | Qualcomm Snapdragon X55 | Qualcomm Snapdragon X62 | ||
Frequency band | ||||||
Sub-6G | n1, n2, n3, n5, n7, n8, n12, n20, n28, n38, n40, n41, n66, n71, n77, n78, n79 | n1, n3, n5, n7, n8, n20, n28, n38, n40, n41, n77, n78,n79 | n2, n5, n7, n12, n13, n14, n25, n30, n41, n48, n66, n71, n77, n78, n79 | 5G NR NSA: n41, n77, n78, n79 | 5G NR NSA: n1, n2, n3, n5, n7, n8, n12, n20, n25, n28, n38, n40, n41, n48, n66, n71, n77, n78, n79 | 5G NR NSA: n1, n2, n3, n5, n7, n8, n12, n13, n14, n18, n20, n25, n26, n28, n29, n30, n38, n40, n41, n48, n66, n70, n71, n75, n76, n77, n78, n79 |
5G NR SA: n1, n2, n3, n5, n7, n8, n12, n20, n25, n28, n38, n40, n41, n48, n66, n71, n77, n78, n79 | 5G NR SA: n1, n2, n3, n5, n7, n8, n12, n13, n14, n18, n20, n25, n26, n28, n29, n30, n38, n40, n41, n48, n66, n70, n71, n75, n76, n77, n78, n79 | |||||
LTE-FDD | B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71 | B1, B3, B5, B7, B8, B18, B19, B20, B26, B28, B32 | B2, B4, B5, B7, B12, B13, B14, B25, B26, B29, B30, B66, B71 | B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71 | ||
LTE-TDD | B34, B38, B39, B40, B41, B42, B43, B48 | B38, B39, B40, B41, B42, B43 | B41, B46, B48 | B34, B38, B39, B40, B41, B42, B43, B48 | ||
LAA | - | B46 | ||||
WCDMA | B1, B2, B3, B4, B5, B8 | B1, B5, B8 | B2, B4, B5 | B1, B2, B3, B4, B5, B6, B8, B19 | B1, B2, B4, B5, B8, B19 | |
GNSS | GPS / GLONASS / BeiDou(Compass) / Galileo/ QZSS (RM500Q-GL and RM502Q-AE do not support this function) | |||||
Data rate | ||||||
Sub-6G | 2.4 Gbps (DL) / 500 Mbps (UL) | 5G NR NSA: 2.1 Gbps (DL) / 900 Mbps (UL) |
5G NR NSA: 4.2 Gbps (DL) / 450 Mbps (UL) |
5G NR NSA: 4.2 Gbps (DL) / 900 Mbps (UL) |
||
5G NR SA: 2.5 Gbps (DL) / 600/650 Mbps (UL) |
5G NR SA: 5.0 Gbps (DL) / 650 Mbps (UL) |
5G NR SA: 3.4 Gbps (DL) / 550 Mbps (UL) |
||||
LTE | 1 Gbps (DL) / 200 Mbps (UL) | 2.0 Gbps (DL) / 200 Mbps (UL) | 1.6 Gbps (DL) / 200 Mbps (UL) | |||
UMTS | 42 Mbps (DL) / 5.76 Mbps (UL) | |||||
Software functions | ||||||
Operating systems | Windows/Linux/Android | |||||
Communication protocols | TCP / UDP / FTP / HTTP / HTTPS / PING / SMS | |||||
Dial Up | RNDIS, NDIS, PPP, MBIM | |||||
Firmware upgrade | Supports firmware upgrade via USB port | |||||
Hardware Specifications | ||||||
SIM Card | 1.8V/2.95V | |||||
Antenna | For 3G/4G/5G/GNSS | |||||
4 × IPEX-4 connectors | ||||||
Power Supply | 3.135~4.4V | 3.135 to 4.4 V, 3.7 V typical | ||||
Form Factor | M.2 | |||||
Dimensions | 42.0 × 30.0 × 2.3mm | 52.0 × 30.0 × 2.3mm | ||||
Note: For reference only, 5G module is not included. If used with other modules, actual testing is required to confirm pin compatibility |
Compatible With 3042 / 3052 Form Factor

Supports directly connect or access via the USB cable to Windows PC, Raspberry Pi 4B/3B+, CM4-IO-BASE-A/B and Jetson Nano series


connecting with Raspberry Pi 4B

Connect to PC with USB cable

Connect to Jetson Nano
Upgrades to a USB3.0 extension cable with an auxiliary power supply port, prevent the power insufficient issue of the USB port when 5G module power consumption is too high, which may affect the networking and speed measurement effect of the module

Supports Windows/Linux
Just plug it into USB port, go through some simple configuration, the high speed 5G network connection will be ready to use

Effective Heat Dissipation For 5G Module, Protect Your HAT At The Same Time


Weight: 0.157 kg
Quick Overview
- USB TO M.2 B KEY x 1
- Aluminum Alloy case (top and bottom) x 1
- Antenna x 4
- IPEX adapter cable x 4
- USB3.0 female to dual USB male extension cable x 1
- SMA Protective Cap x 4
- Thermal tape x 1
- Screws pack x 1
