- Description
- Package Content
Details


adopting 37-520 full-metal DC gearmotor, high torque, low noise

180° wide angle rotation, flexible controlling

high torque, high precision, preventing it from being stuck and damaged

Collecting data via camera by taking enough images of different conditions, using the data to train the neutral network, combined with AI algorithm, finally achieving auto collision avoidance on sorts of environments.


Capturing moving objects on the video by motion detection


recognizing and locking specified color by camera,
and then using pan & tilt to track the specified color automatically



easier to use, more flexible

calculated via inverse kinematics algorithm
input coordinate of the target, calculating the moving angles of the 4-DOF servos by inverse kinematics algorithm, and then controlling the servos via serial bus, moving the robotic arm to reach target position

JupyterLab is a web-based interactive development environment, supports multi data formats including code, document, image/video, UI control interface, etc., provides rich visualized output, allows easily creating dashboard and UI, supports flexible configuration and arrangement for modular interface.

IMX219 sensor, 3280×2464 resolution

High Speed WiFi, Stable Bluetooth Communication, Low Latency

Rechargeable, Battery Voltage Monitor, No Messy Wiring, Simple Assembly


Quick Overview
- The 18650 batteries are NOT included
- Please note that the battery length SHOULD be less than 67mm, some batteries with protection plate in the market are NOT supported, learn more
- OPTIONS Jetson Nano Developer Kit (B01)
- OPTIONS Micro SD Card 64GB
- Aluminum alloy kit x1
- JETANK expansion board x1
- Wireless-AC8265 with antenna x1
- IMX219-160 Camera x1
- Acrylic camera spacer x1
- Camera FFC x1
- 0.91inch OLED x1
- 12.6V 2A power supply + additional EU head x1
- Robotic arm gripper x1
- Thrust bearing x1
- Flange bearing x2
- Coupler x2
- Gearmotor x2
- 5264 servo wire x1
- Track kit (including bolt, nut, and screwdriver) x2
- 2*5Pin wire x1
- Spanner x1
- L-form hex socket spanner 2PCS x1
- SCS15-AP servo x4
- Screwdriver 2PCS x1
- SCS15-S servo x1
- Card reader x1
- Mini cross wrench sleeve x2
- Cooling fan x1
- PH2.0 4PIN dual connector cable x1
- Screws pack x1
