- Description
Details
It's Racing Time! Meet the JetRacer — AI Racing Robot Powered by Jetson Nano
Note: the Jetson Nano is optional.
Jetson AI Robot Selection Guide
 JetBot 2GB |
 JetBot |
 JetRacer |
 JetRacer Pro |
||
| Controller | Jetson Nano 2GB | Jetson Nano | |||
|---|---|---|---|---|---|
| OS | Ubuntu 18.04 LTS | ||||
| Language | Python | ||||
| Camera | 8MP HD resolution, 160° FOV wide angle camera | ||||
| OLED | 0.91" 128×32 pixels | ||||
| Wireless | 2.4GHz / 5.8GHz dual-band WiFi | 2.4GHz / 5GHz dual-band WiFi, Bluetooth 4.2 | |||
| Teleoperation | Gamepad, webpage | ||||
| Communication | WiFi | ||||
| Protection | over charge/discharge protection, over current protection, short circuit protection, reverse proof | ||||
| Driving Type | Differential 2WD | Ackerman steering Dual gearmotor rear wheel drive |
Ackerman steering High speed motors 4WD Front and rear axle differentials |
||
| Shock absorber | N/A | Adjustable oil-filled shocks 4WD independent suspension |
|||
| Power supply | 12.6V, 18650 battery × 3 (connected in series) |
8.4V, 18650 battery × 4 (two in parallel, two in series) |
|||
| Note: the 18650 batteries are NOT included. | |||||
| motor | TT motor Reduction rate 1:48 Idle speed 240RPM |
37-520 DC gearmotor Reduction rate 1:10 Idle speed 740RPM |
RC380 high speed carbon brushed motor Idle speed 15000RPM |
||
| Servo | N/A | MG996R, 9kg/cm torque | E6001, 6kg/cm torque | ||
| Chassis | Aluminum alloy chassis | Quality rugged plastic chassis | |||
| Crashproof | N/A | Front sponge | |||
| Program library | JetBot, ROS | JetRacer, DonkeyCar | |||
| Suggestion | Entry level Basic programming skill required |
Competition level Experienced programming skill required |
High speed competition level Experienced programming skill required |
||
Quick Overview
- Please properly keep the Jetson products' original packing box and accessories (if any) for warranty service, and the serial numbers on the product and packing box MUST be matched, otherwise, the original manufacturer will reject returning / repairing.
- The 18650 batteries are NOT included
- Please note that the battery length SHOULD be less than 67mm, some batteries with protection plate in the market are NOT supported, learn more
- OPTIONS Jetson Nano Developer Kit (B01)
- OPTIONS Micro SD Card 64GB
- JetRacer metal kit 6PCS
- EVA felt pad 2PCS
- 3D-printed motor lid
- JetRacer expansion board
- IMX219-160 Camera
- Wireless-AC8265
- Acrylic piece
- Servo mount
- Metal Gearmotor 2PCS
- Tire 4PCS
- Coupler 2PCS
- MG996R servo
- MG996R servo wheel
- Steering knuckle 2PCS
- Ball bearing 4PCS
- M3 plastic ball joint 4PCS
- M3 pull bar 2PCS
- 12.6V battery charger + EU head
- Wireless gamepad
- 6Pin cable
- Spanner 2PCS
- Screwdriver 2PCS
- Mini cross wrench sleeve
- 4010 cooling fan
- Micro SD card reader
- Screws pack
- Track map
