Details
Recharged From 6V~24V Solar Panel, Or Type-C Power Adapter
5V/3A Regulated Output
The Solar Power Management Module (D) is designed for 6V ~ 24V solar panel, enabling intelligent management and high-efficiency charging for 3.7V rechargeable Lithium Batt through solar panel or Type-C port, and provides 5V/3A regulated output (supports multiple protocols such as PD / QC / AFC / FCP / SCP / PE / SFCP). The module features the MPPT (Maximum Power Point Tracking) algorithm, effectively enhancing solar energy conversion efficiency, and is equipped with multiple hardware protections and status indicators to ensure stable system operation. It is ideal for solar power generation, low-power IoT, mobile energy storage, and other environmental protection projects.
-
Efficient Charging Management
- Supports MPPT (Maximum Power Point Tracking), automatically adjusts the operating point, significantly improving solar energy utilization
- Supports multiple input methods, including solar panel, Type-C power adapter, DC-002 jack, or screw terminals
- Supports 6V ~ 24V wide range input voltage, compatible with a variety of solar panel specifications
-
Flexible Batter Management
- Onboard rechargeable Lithium Batt header (PH2.0 4PIN Batt header and screw terminals, supports Batt replacement and expansion)
- Automatically switches between charging and discharging, enabling simultaneous charging and discharging
- Batt charge level indicator for easy real-time monitoring
-
Stable Power Output
- Supports 5V/3A regulated output, compatible with multiple fast-charging protocols (PD, QC, AFC, FCP, SCP, PE, and SFCP)
- Provides a stable power supply for IoT devices, mini PCs, portable electronics, etc.
-
Reliable Protection Circuit
- over-charge / over-discharge / solar reverse-proof / overheat / over-current / short circuit
- Onboard aluminum electrolytic capacitors + ceramic capacitors provide combined filtering, effectively reducing output ripple and improving stability
-
Visualization & Usability
- Onboard status indicators: Batt level, Batt charging, warning indication
- Modular design for easy integration into various application projects
Solar Power Manager (D)
Single module
Solar Power Manager (D) Acce A
Single module + Battery holder
 Solar Power Manager |
 Solar Power Manager (B) |
 Solar Power Manager (C) |
 Solar Power Manager (D) |
|
|---|---|---|---|---|
| SOLAR IN | 6V ~ 24V (6V by default) |
6V ~ 24V | ||
| Recharging | Solar panel, power adapter, USB | |||
| Battery | 3.7V 14500 Li-ion battery (NOT included) | 3.7V 10000mAh Li-po battery | 3x 18650 Li-ion battery (NOT included) | |
| USB input | 5V (Micro USB) | 5V (TYPE-C, with PD quick charge support) | ||
| 5V output | 5V / 1A (USB OUT, pin header) 3.3V / 1A (pin header) |
5V / 3A (USB-OUT, TYPE-C) | 5V / 3A (TYPE-C, screw terminal) | |
| Recharging cutoff voltage | 4.2V ± 1％ | |||
| Over discharging protection voltage | 2.9V ± 1％ | 3.0V ± 1％ | ||
| Solar panel recharging efficiency | ~78% | |||
| USB recharging efficiency | ~82% | ~93% | ||
| Batteries boost output efficiency | ~86% | ~90% | ||
| Quiescent current (Max) | <2mA | <10mA | <8mA | |
| Case | N/A | Metal case | N/A | |
| Operating temperature | -40℃ ~ 85℃ | |||
| Dimensions (mm) | 65.2 × 56.2 × 22.9 | 108.0 × 71.0 × 25.2 | 119.0 × 71.0 × 25.2 | 45.0 × 40.0 × 10.1 |
Suitable for Solar-Powered Control System For MCUs / Development Boards Like Raspberry Pi / Jetson Nano / Arduino...
for reference only, the Raspberry Pi 4B and solar panel are not included
Suitable For Mini Solar Road Lamp, Intelligent Agriculture, Or IoT Applications
- Solar panel charging input:
charged by solar panel via DC-002 jack or screw terminal, self-adaptive input voltage - Type-C charging input:
charged by 5V power adapter via Type C connector, or outputs 5V for external device - Power output:
screw terminal: 5V/3A output - Battery interfaces:
for connecting 3.7V rechargeable Li battery via screw terminal or PH2.0 4P connector - SW6201S:
USB power management chip, for USB charging and 5V/3A boost output
- CN3791:
solar power management chip, for solar panel charging and buck input - XB8089D0
Li battery over-charge / over-discharge protection - Battery capacity indicators
lights up when charging or under load connection, and will turn off after 30s when there is no load connected - Solar panel charging indicators:
Charge: on when solar panel charging
Done: on when the battery is full charged by solar panel - Anti-reverse MOS tube
prevents reverse Batt connection - Function button
Single press: Automatically activate the output when a load is connected
Double press: Enters low-current mode, supporting ultra-low power loads
* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.
SAFETY CAUTIONS
- Li-ion and Li-po batteries are quite unstable. They may cause fire, personal injury, or property damage, if they're not properly recharged or used.
- Do not reversely connect the polarities when recharging or discharging the battery. Do not use inferior charger/charging panel to recharge the battery.
- Do not mix use old batteries with new ones, avoid using batteries of different brands.
- When buying Lithium battery, should always make sure the battery specification is compatible with the expansion board. Choose batteries from formal manufacturer, and ensure the batteries will work stably and safely by aging test.
- Lithium batteries have limited cycle life, they will also deteriorate as time goes by. Should be replaced with new ones when the batteries reaching their max cycle life, or working over two years, whichever comes first.
- Should be placed carefully and properly, keep it away from inflammables and explosives articles, away from children, avoid any safety accident caused by careless storage.
Quick Overview
Solar Power Manager (D)
- Solar Power Manager (D) x1
Solar Power Manager (D) Acce A
- Solar Power Manager (D) x1
- Battery holder x1
