Raspberry Pi Compute Module 4 IO Board, a Development Platform for CM4

SKU: 18796
Part Number: Compute Module 4 IO Board
Brand: Raspberry Pi Foundation

$39.99
$39.792+
$39.693+
$39.654+
Description

Details

Raspberry Pi Compute Module 4 IO Board, a development platform and reference base-board design for CM4
Compute module 4 IO Board

The Compute Module 4 IO Board is a companion board for Raspberry Pi Compute Module 4 (supplied separately). It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated into end products.

The IO board is designed to allow you to create systems quickly using off-theshelf parts such as HATs and PCIe cards, which might include NVMe, SATA, networking, or USB. The major user connectors are located along one side to make enclosures simple.

Compute Module 4 IO Board also provides an excellent way to prototype systems using the Compute Module 4.

Interfaces introduction
Specifications
CM4 socket suitable for all variants of Compute Module 4
Connectors Standard Raspberry Pi HAT connectors with PoE support
Standard PCIe Gen 2 x1 socket
Various jumpers to disable specific features, e.g. wireless connectivity, EEPROM writing
RTC Real-time clock with battery socket and ability to wake Compute Module 4
Video 2 x MIPI DSI display FPC connectors (22-pin 0.5 mm pitch cable)
Camera 2 x MIPI CSI-2 camera FPC connectors (22-pin 0.5 mm pitch cable)
USB 2 x USB 2.0 connectors
Micro USB socket for updating Compute Module 4
Ethernet Gigabit Ethernet RJ45 with PoE support
Storage socket MicroSD card socket for Compute Module 4 Lite (without eMMC) variants
Fan Standard fan connector
Power input 12V / 5V
Dimensions 160 × 90mm
CM4 base board selection guide
CM4 Base BoardInterface count and specifications
PoEGigabit
ETH
40PIN
GPIO
PCIeUSB①DSIHDMICSIRTCFan
Header
Power
Input
Features

NANO A
      2.0×1     ×1     5V CM4 sized

NANO B
  ×1   2.0×1 ×1 ×1 ×1     5V CM4 sized

Duino
      M.2 M 2.0×1   ×1 ×1     5V Arduino compatible

mini Base A
  ×1 M.2 M 2.0×4 ×1 ×2 ×2   5V 5V mini size

mini Base B
  ×1 M.2 M 2.0×4 ×1 ×2 ×2 5V 5V mini size

Touch screen
  ×1   M.2 M 2.0×4   ×1 ×1     5V IPS screen

Binocular camera
  ×1 M.2 M 2.0×4   ×2       5V dual 8MP
cameras

4CH RS485
  ×1     2.0×2   ×1 ×2 ×1 5V 7-36V dual ETH

Dual Gigabit ETH
  ×2   3.0×3 ×1 ×2 ×2 5/12V 7-36V  

IoT Dual Gigabit ETH
  ×2   3.0×2 ×1 ×2 ×2 5/12V 5V 5G/4G support

IoT Base
×1   Gen2×1 2.0×2 ×2 ×2 ×2 5/12V 7-36V 5G/4G support
RS232
RS485
ADC

PoE Base (B)
×1 Gen2×1 2.0×4 ×2 ×2 ×2 5/12V 5V RS232
RS485

PoE UPS Base
×1 M.2 M 2.0×4 ×1 ×2 ×2 5/12V 7-36V UPS

PoE Base
×1   3.0×4 ×2 ×2 ×2 5/12V 7-36V  

Raspberry Pi official
×1 Gen2×1 2.0×4 ×2 ×2 ×2 12V 12V  

Wireless base
  ×1   M.2 B /
Mini-PCIe
2.0×3   ×1 ×1 5/12V 5V or
7-36V
5G/4G support
RS485
CAN
rail-mount

5″ touch screen
×1 M.2 M 2.0×4   ×1 ×2 5/12V 5V  

7″ all-in-one
  ×1   M.2 M 2.0×4 used ×1 used 5/12V
used
7-36V touch screen
camera
speaker
Note ① USB 3.0 is equivalent to USB 3.2 Gen1
② There's PoE header only on the Raspberry Pi official IO board without PoE circuit, that means additional PoE module is required for the official IO board to enable PoE feature.
Unless otherwise specified, the PoE feature here stands for integrating 802.3af-compliant PoE circuit (5V/2.5A).
Resources & Services

Weight: 0.107 kg

Quick Overview

  1. Compute Module 4 IO Board x1
Raspberry Pi Compute module 4 IO Board