SIM7000E NB-IoT / Cat-M / EDGE / GPRS HAT for Raspberry Pi, GNSS, for Europe, Africa, Australia, Southeast Asia

SKU: 14865
Part Number: SIM7000E NB-IoT HAT
Brand: Waveshare

$33.99
$33.392+
$33.093+
$32.974+

Related Products:

Description

Details

Prohibited by the module manufacturer SIMCOM, we're not allowed to ship this product, or to provide any tech support, to the following countries/regions: Iran, North Korea, Cuba, Sudan, Syrian.
SIM7000E is mainly applicable in Europe, Africa, Australia, Southeast Asia, SIM7000C is mainly applicable in Asia-Pacific region.
Please check the supported bands according to your local service provider, select the proper one when placing order.
SIM7000E NB-IoT / Cat-M / EDGE / GPRS HAT for Raspberry Pi, GNSS positioning, for Europe, Africa, Australia, Southeast Asia
NB-IoT / Cat-M / GPRS / GNSS HAT

Low power narrow band cellular IoT communication module for Raspberry Pi

Based on SIM7000E

This is a telecommunication HAT for Raspberry Pi which supports NB-IoT, Cat-M, EDGE, and GPRS, as well as GNSS positioning function. Due to its advantages like small size, low delay, and wide coverage, it is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, e-health, and so on.

Features at a glance
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
  • Supports TCP, UDP, PPP, HTTP, FTP, MQTT, SMS, Mail, etc.
  • Supports GNSS positioning (GPS, BeiDou, GLONASS, Galileo)
  • Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
  • Breakout UART control pins, to connect with host boards like Arduino/STM32
  • Onboard voltage translator, 3.3V by default, allows to be switched to 5V via 0Ω resistor
  • SIM card slot, compatible with both normal SIM card and NB-IoT specific card
  • 2x LED indicators, easy to monitor the working status
  • Baudrate: 300bps~3686400bps
  • Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)
  • Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 98, USAT
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Specifications
NB-IoT / Cat-M / 2G
Band NB-IoT/Cat-M: FDD-LTE B3/B8/B20/B28
GPRS/EDGE: 900/1800 MHz
Data rate NB-IoT: 34(DL)/66(UL)
Cat-M: 300(DL)/375(UL)
EDGE: 236.8(DL)/236.8(UL)
GPRS: 85.6(DL)/85.6(UL)
SIM card support NB-IoT: NB Specific (Not Included)
Cat-M/GPRS/EDGE: Normal SIM (Not Included)
Applicable region Europe, Africa, Australia, Southeast Asia
GNSS
Satellite systems GPS, BeiDou, GLONASS, Galileo
Receiver type 16-channel
C/A Code
Sensitivity Tracking: -162 dBm (GPS) / -157 dBm (GLONASS) / TBD (BD)
Cold starts: -148 dBm
Time-To-First-Fix Cold starts: <35s
Hot starts: <1s
Accuracy Position: <2.5m CEP
Other
Power supply 5V
Operating voltage 5V / 3.3V (3.3V by default)
Sleep Mode current 1.2mA (@DRX=2.56s)
Power Save Mode current 9uA
Operating temperature -40°C ~ 85°C
Storage temperature -45°C ~ 90°C
Dimensions 30.2mm x 65mm
Standard Raspberry Pi 40PIN GPIO

Compatible with Raspberry Pi series boards

NB-IoT / Cat-M / EDGE / GPRS support

Cloud Communication

Supports communication protocols including
TCP, UDP, PPP, HTTP, FTP, MQTT, SMS, Mail...

GNSS positioning

Supports GPS, BeiDou, GLONASS, Galileo positioning

What's on board
  1. SIM7000E
  2. SPX29302 power chip
  3. RT9193-33 power chip
  4. Raspberry Pi GPIO header
    for connecting with Raspberry Pi
  5. USB interface
    for testing AT Commands, getting GPS positioning data, etc.
  6. SIM7000E control interface
    for connecting with host boards like Arduino/STM32
  7. SIM card slot
    supports 1.8V/3V SIM card
  8. GNSS antenna connector
  9. LTE antenna connector
  1. Network status indicator
  2. Power indicator
  3. Operating voltage selection jumper
    configured via 0Ω resistor jumper
    A: set operating voltage as 5V
    B: set operating voltage as 3.3V (default)
  4. DTR configuration jumper
    configured via 0Ω resistor jumper
    A: DTR is controlled by the Raspberry Pi P26 pin
    B: NC (default)
  5. PWR configuration jumper
    configured via 0Ω resistor jumper
    A: startup/shutdown by the Raspberry Pi P4 pin
    B: auto startup on power-up (default)
Pinout definition
Outline Dimensions
Resources & Services

* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.

Selection Guide
 Cat-M & NB-IoT & GSMCat-M & NB-IoTNB-IoT
 SIM7000CSIM7000ESIM7070GSIM7080GSIM7020CSIM7020E
Applicable regions China Europe / Africa / Australia / Southeast Asia Global China Europe / Africa / Australia / Southeast Asia
Band
NB-IoT LTE-FDD: B1/B3/B5/B8 LTE-FDD: B3/B8/B20/B28 B1/B2/B3/B4/B5/B8/B12/B13/B18/B19
/B20/B25/B26/B28/B66/B71/B85
LTE-FDD:
B1/B3/B5/B8
LTE-FDD:
B1/B3/B5/B8/B20/B28
Cat-M B1/B2/B3/B4/B5/B8/B12/B13/B14/B18
/B19/B20/B25/B26/B27/B28/B66/B85
N/A
GSM GPRS/EDGE 900/1800 MHz GSM/GPRS/EDGE 850/900/1800/1900MHz N/A N/A
GNSS GPS, GLONASS, BeiDou GPS, GLONASS, BeiDou, Galileo N/A
Data Rate
NB-IoT(Kbps) 34(DL)/66(UL) 136(DL)/150(UL) 136(DL)/150(UL) 26.15(DL)/62.5(UL)
Cat-M(Kbps) 300(DL)/375(UL) 589(DL)/1119(UL) 589(DL)/1119(UL)  
EDGE(Kbps) 236.8(DL)/236.8(UL) 236.8(DL)/236.8(UL)    
GPRS(Kbps) 85.6(DL)/85.6(UL) 85.6(DL)/85.6(UL)    
Software Features
Network protocol TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT, etc.
Firmware upgrade USB UART
Hardware Interfaces
SIM card slot 1.8V/3V 1.8V 1.8V 1.8V/3V
UART Supports AT commands Supports AT commands, firmware upgrading
USB Supports AT commands testing, GPS positioning, firmware upgrading, etc. For external power supply ONLY
Antenna connector LTE antenna (SMA) + GNSS antenna (IPEX) LTE antenna (IPEX) + GNSS antenna (IPEX) LTE antenna (SMA)
Applications
Examples Meters, remote control, smart home, smart city, intelligent agriculture, and so on

Weight: 0.132 kg

Quick Overview

  1. SIM7000E NB-IoT HAT x1
  2. GSM Antenna x1
  3. GPS External Antenna (B) x1
  4. USB-A to Micro-B cable x1
  5. Standoffs pack x1
1
2
3
4
5