OV2710 2MP USB Camera (A)

From Waveshare Wiki
Jump to: navigation, search
OV2710 2MP USB Camera (A)
USB-Camera

USB Camere, 2 megapixel. UVC protocol
{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Introduction

USB Camera, OV2710 sensor. 2 megapixel. Supports UVC protocol.

more

Specification

  • Pixels: 2MP
  • Resolution: 1920 × 1080
  • Sensor: OV2710
  • DSP: Automatic white balance(AWB)\Automatic exposure(AEC)\Automatic gain control(AGC)
  • Camera Specifications:
    • CCD size: 1/2.7inch
    • Aperture (F): 2.8
    • Focal length (EFL): 2.9mm
    • Field of View (FOV): 145°
    • Sensitivity: 69dB
  • Interface: USB2.0
  • Image Format: MJPEG, YUY2
  • Working temperature: 0°C ~ 50°C
  • Dimension: 38mm × 38mm
  • OS Support: Windows, Linux

Working with Windows PC

Test Software

Most of Windows 10 PC has pre-install Camera software, you can use it to test the USB camera.
If your PC doesn't have Camera software, you can also download the AMCap test software from Resource->Software and test.

Testing

Use Camera Software of Windows
  • Search "Camera" and open the software.
  • Click the setting icon on the top left to configure the image/video.
Usb-camera-manual-1.png
  • You can click the icons on the right to switch between Image Capture or Video Recording.
AMCap Software
  • Download and install the AMCap software.
  • You can click the Options option, and choose Video Capture Pin... or Still Capture Pin... to configure the image/video.
Usb-camera-manual-2.jpg

Working with Raspberry Pi

Buster

  • Open a terminal of Raspberry Pi (You can use the Ctrl+Alt+T shortcut):
  • Edit the modules file:
sudo nano /etc/modules
  • Add the following command in the document and save:
bcm2835-v4l2
  • Ues command sudo raspi-config to open the configuration:
    • Choose Interface Option -> Camera -> Yes to enable the camera and reboot.

Bullseye

You can directly test the USB camera on the Bullseye system.

Camera Test

  • Open a Terminal of Pi and install luvcview tool with the following command:
    • sudo apt-get install luvcview -y
  • After installing, use the following command to test the USB camera.
    • sudo luvcview -s 1920 x 1080
Usb-camera-manual-3.jpg

Working with Jetson Nano Developer Kit

  • Open a terminal of Jetson Nano Developer Kit (You can use the Ctrl+Alt+T shortcut or open it by Mouse).
  • Use the following command for previewing:
    • nvgstcapture-1.0 --camsrc=0
  • With the command, a preview window is opened.
Usb-camera-manual-4.jpg

【Notice】You may need to use the camera by script/codes, in this case, you can refer to tools/libraries like Opencv yourself.

Resources

Documents

Software

FAQ

 Answer:

Do not touch the components on the back of the PCB with your hands, so as not to affect the electrical characteristics.

{{{3}}}
{{{4}}}

{{{5}}}


 Answer:

It is normal that the module would generate a lot of heat during use.

{{{3}}}
{{{4}}}

{{{5}}}


 Answer:

If you are using a Mac system and Opencv, some parameter settings are not available, so we recommend using a Linux system and the V4L2 driver.

{{{5}}}


 Answer:

The OV2710 2MP USB Camera (A) does not record audio with video. It only has a USB interface for video streaming, and no microphone is embedded.

{{{5}}}


Support



Technical Support

If you need technical support or have any feedback/review, please click the Submit Now button to submit a ticket, Our support team will check and reply to you within 1 to 2 working days. Please be patient as we make every effort to help you to resolve the issue.
Working Time: 9 AM - 6 AM GMT+8 (Monday to Friday)