XNUCLEO-F401RE Package B

From Waveshare Wiki
Jump to: navigation, search

Resources

XNUCLEO-F401RE
STM32F4 Improved STM32 NUCLEO Board
XNUCLEO-F401RE l.jpg

STM32 Development Board, Supports Arduino, Compatible with NUCLEO-F401RE
XNUCLEO-F401RE Package A
XNUCLEO-F401RE-Package-A l.jpg

STM32 Development Board, Supports Arduino, Compatible with NUCLEO-F401RE, Comes with Various Sensors
XNUCLEO-F401RE Package B
XNUCLEO-F401RE-Package-B l.jpg

XNUCLEO-F401RE Development Kit, Comes with Common Used Peripheral Shields, OLED, RTC, AD/DA, Audio Codec ...
{{{name4}}}

{{{name5}}}

Primary Attribute
Category: Arduino, mbed
{{{userDefinedInfo}}}: {{{userdefinedvalue}}}
Brand: Waveshare
Website
English: Waveshare website
Chinese: 官方中文站点
Onboard Interfaces
Arduino ICSP ST Morpho SWD
USB USB TO UART
Related Products

Resources

FAQ

Question:
How to connect with a XNUCLEO development board for testing?
Answer:

Before the testing, please make preparations as follow:

  1. A power supply;
  2. A programmer or emulator, such as ST-Link V2 (mini);
  3. A Micro USB cable;
  4. Setting the JP3.

Steps:

1. Connect to the power supply. There are two ways for power supply, and either of them is available:

  • USB: This USB interface can be used for either USB communication testing or power supply.
  • USB TO UART:This interface is a USB to serial interface (Virtual Serial Port) for serial communication debugging. It can also be used for power supply.
  • DC socket for DC power supply unit (6~12V).

2. Setting the JP3. When using the USB or the USB TO UART interface for power supply, the JP3 should select U5V; when using the DC power supply unit (6~12V) as power supplier, the JP3 should select E5V;

3. Connect the ST-Link V2 (mini)to the SWD interface on the XNUCLEO board for program downloading or emulation.

4. For serial communication debugging, connect your PC to the USB TO UART interface on the XNUCLEO board.

Connect your PC to the board via the USB TO UART interface for serial debugging. In this case, the XNUCLEO board is power supplied by the PC USB.
Connect your PC to the board via the USB interface for USB communication testing. In this case, the XNUCLEO board is power supplied by the PC USB.
Connect your PC to the board via the USB and the USB TO UART interfaces for USB communication testing and serial debugging. In this case, the XNUCLEO board is power supplied by the PC USB.
Connect a DC power supply unit to the board. In this case, the XNUCLEO board is power supplied by the external power source.
Connect a DC power supply unit to the board and connect your PC to the board via the USB TO UART interface for serial debugging. In this case, the XNUCLEO board is power supplied by the external power source.
Connect a DC power supply unit to the board. And connect your PC to the board via the USB and the USB TO UART interfaces for USB communication testing and serial debugging. In this case, the XNUCLEO board is power supplied by the external power source.


Support

Mail.png Contact your seller (fast response and most recommended)

or send emails to [email protected] (not fast enough but please be patient) for help.

Our working time: 09:00-18:00 (UTC+8 Monday to Saturday)