USB AVRISP PL

[中文]

USB AVRISP PL

Introduction

• AVR ISP Programmer, compatible with AT AVRISP from ATMEL
• A professional low cost In-System Programmer. Programs FLASH , EEPROM, Fuses, and Lock Bit through USB

More

Resources

• User Guide
• Driver
• Software

FAQ

Question: I connect the USB AVRISP PL to a PC, but the PC cannot identify it. Why?

Answer: The PC may identify the USB AVRISP PL as a USB-to-COM interface. Normally, most PCs may have this driver: If the PC cannot identify the USB AVRISP PL, you can install this driver to your PC: Click here to download Notice: If the COM port occupied by the USB AVRISP PL is out of the range of COM1~COM4 (In this example, it is COM6 as the figure above shows), please modify the relative COM port number to the range of COM1~COM4, so that the USB AVRISP PL can work properly.

Support

Please contact us by Email/Skype/WeChat for technology support.Our response may be delay, you can just leave your questions, we will reply to you as soon as possible in working time.

	[email protected]
	[email protected]
	09:00 - 18:00 (UTC+8 Monday to Staturday)