Template: RGB-Matrix-P3-64x32 Spec
From Waveshare Wiki
Features
- 2048 individual RGB LEDs, full-color display, adjustable brightness.
- 64 x 32 pixels, 3mm pitch, allows displaying text, colorful images, or animation.
- 192 x 96mm dimensions, moderate size, suitable for DIY desktop display or wall mount display.
- Onboard two HUB75 headers, one for controller data input, one for output, and chain support.
- Comes with online open-source development resources and tutorials, for use with Raspberry Pi, Pico, ESP32, Arduino, and so on.
Specifications
| DIMENSIONS | 192mm × 96mm |
|---|---|
| PIXELS | 64 × 32=2048 DOTS |
| PITCH | 3mm |
| PIXEL FORM | 1R1G1B |
| VIEWING ANGLE | ≥160° |
| CONTROL TYPE | synchronization |
| DRIVING | 1/16 scan |
| HEADER | HUB75 |
| POWER SUPPLY | 5V / 2.5A（VH4 header input） |
| POWER | ≤12W |
Header Definition
| PIN | DESCRIPTION | PIN | DESCRIPTION | |
|---|---|---|---|---|
| VCC | 5V power input | GND | Ground | |
| R1 | R higher bit data | R2 | R lower bit data | |
| G1 | G higher bit data | G2 | G lower bit data | |
| B1 | B higher bit data | B2 | B lower bit data | |
| A | A line selection | B | B line selection | |
| C | C line selection | D | D line selection | |
| E | E line selection | CLK | clock input | |
| LAT/STB | latch pin | OE | output enable |
Note: The power supply port (VCC and GND) of the display is 5V, do not connect to other power supply voltages, or you will burn the display.
Usage Scenarios
DIY Maker Desktop Or Wall Mount Display, Signboard, Environment Monitor...
