Template: Pico e-Paper 5.83 B Spec
Overview
5.83inch EPD (Electronic Paper Display) Module For Raspberry Pi Pico, 648 × 480 Pixels, Black / White/ Red, SPI Interface.
Features
- No backlight keeps displaying last content for a long time even when power down.
- Ultra-low power consumption, basically power is only required for refreshing.
- SPI interface requires minimal IO pins.
- 2 x user buttons and 1x reset button for easy interaction.
Specification
- Dimension: 5.83inch
- Outline dimensions(raw panel): 125.40mm x 99.50mm x 1.18mm
- Outline dimensions(driver board): 65mm x 31mm
- Display Size: 119.232(H) x 88.320(V)
- Operating voltage: 3.3V
- Interface: SPI
- Dot pitch: 0.184 x 0.184
- Display color: Red, Black, White
- Resolution: 648(H) x 480(V)
- Greyscale: 2
- Full refresh time: 20s
- Refresh power: 26.4mW (typ.)
- Standby current: <0.01uA (almost none)
【Note】:
Refresh time: The refresh time is the experimental test data, the actual refresh time will have errors, and the actual effect shall prevail. There will be a flickering effect during the global refresh process, this is a normal phenomenon.
Power consumption: The power consumption data is the experimental test data. The actual power consumption will have a certain error due to the existence of the driver board and the actual use situation. The actual effect shall prevail.
SPI Timing
Note: Different from the traditional SPI protocol, the data line from the slave to the master is hidden since the device only has a display requirement.
- CS is slave chip select, when CS is low, the chip is enabled.
- DC is data/command control pin, when DC = 0, write command, when DC = 1, write data.
- SCLK is the SPI communication clock.
- SDIN is the data line from the master to the slave in SPI communication.
- Timing: CPHL=0, CPOL=0 (SPI0)
[Remarks] For specific information about SPI, you can search for information online.