Template: M.2 TO 4G/5G HAT introduction

Features

Integrates extensive network protocols, with multi drivers and software support, compatible with different OS including Windows / Linux / Android.
USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high-speed 5G communication.
Standard M.2 B KEY slot, compatible with different 5G modules: RM500U-CN / RM500Q-GL / RM500Q-AE / RM502Q-AE series.
Onboard UART, PWR, and RST control pin, built-in voltage level translator, enabled via DIP switch, for use with hosts like Raspberry Pi or Arduino.
Onboard USB-C connector, enabled via a switch, for connecting the standalone power supply for the module, allows more loads, a stable and flexible power supply.
Onboard power supply on/off switch, reset button, and LED indicator, easy to turn on/off the module or monitor the operating status.
2 x SIM card slot, dual card single standby, switchable via AT command. (Some 4G/5G modules do not support dual sim cards, depending on the actual supporting modules.)
High-efficiency power supply circuit, up to 3A output current.

This product is available with an optional 5G module and also with the optional case.