Template: Jetson Nano Xavier NX Dev Kit FAQ

FAQ

Question:Why doesn't the NX-FAN-PWM work after connecting?

 Answer:

The cooling fan in the NX-FAN-PWM is adjustable with PWM signal, the system will auto-run it if the temperature reach threshold, you can also refer to #FAN about how to control it manually.

Question:The display cannot work after booting?

 Answer:

Please check if you have connected the display tightly, and please use HDMI or DP display. And please use the newest image and test it again.

{{{3}}}

{{{4}}}

{{{5}}}

Question:Why is the development board type recognized as UNKNOWN on jtop after Xavier NX changed to SSD to boot the system?

 Answer:

Since the Xavier NX boot disk is set to solid state if it's not an official board, it doesn't have a corresponding EPPROM ID, so it's recognized as UNKNOWN, which doesn't affect its use.

{{{5}}}

Question:What is the maximum voltage supported by Xavier NX?

 Answer:

21V.

{{{5}}}

Question:Does the "can" next to the carrier board work?

 Answer:

Yes, but you need to use it after soldering pin headers.

{{{5}}}