Template: Hall Sensor Arduino Guide

Use with Arduino

The examples provided are based on the Arduino UNO, if you need to use other Arduino boards, please check if the board is compatible with the UNO.

Hardware connection

Hardware connection-Arduino

Connect to Arduino UNO

Hall	Arduino	Description
VCC	5V	Power input
GND	GND	Ground
AOUT	A0	Analog data output
DOUT	D2	Digital data output

Examples

• Please download and install Arduino IDE to your PC.
  • Arduino Website
• Download the demo codes, unzip them, and find the Arduino examples.
• Open the Hall_Sensor.ino file by the Arduino IDE.

• Build and upload the codes to the UNO board.
• After uploading, you can open the Serial Monitor of IDE and check the data.

Expected result

• The indicator of the sensor lights up when the sensor is near the magnet and goes off when it is away from the magnet.
• As the sensor contacts and separates from the metal, the output data of the serial port will change accordingly.