Template: 7inch HDMI LCD H Jetson Guides

From Waveshare Wiki
Jump to: navigation, search

Working with Jetson Nano

To work with Jetson Nano Developer Kit, you don't need to make software configurations.

1) Connect the TOUCH interface of the LCD to the USB interface of Jetson Nano.

2) Connect the HDMI interface of the LCD to the HDMI interface of the Jetson Nano and then power on the Jetson Nano. After about 5 seconds, you can see the LCD display normally. If you need to output sound, you can insert a 3.5mm earphone into the HP audio output interface.

Note:

1) If the LCD flickers, it may be due to the insufficient power supply of the Jetson Nano's USB interface. It can be solved normally after connecting to an external 5V/2A power supply through the DC interface of the LCD.

2) When the HP audio interface is in use, it may be necessary to set the sound output settings in the system.