Template: 2.4inch LCD for arduino use
From Waveshare Wiki
The examples are all tested with Arduino UNO and the instruction are based on Arduino, if you use other types, please change the connection according to the actual boards.
Hardware Connection
| LCD | UNO |
| VCC | 5V |
| GND | GND |
| DIN | D11 |
| CLK | D13 |
| CS | D10 |
| DC | D7 |
| RST | D8 |
| BL | D9 |
Run the demo codes
Download the demo codes and unzip it. The Arduino project is located in ~/Arduino/…
Run the project according to the actual display type
For examples: 1.54inch LCD Module. Enter the LCD_1inch54 directory and run the LCD_1inch54.ino file
Run the project and choose Arduino UNO as Board
Select the COM Port according to your Device Manager
Compile and download it to your board
