Search results

Jump to: navigation, search
  • | colspan="4" | 1 × 2.5inch HDD interface; 1 × SATA3.0 interface, 2Pin5V | colspan="4" | 1 × HDMI2.0 interface, supports 4096×2160@60hz;
    4 KB (503 words) - 01:36, 4 January 2024
  • |USB2.0|| USB2.0 *Camera interface: for connecting to the CAM of zero 2w.
    2 KB (314 words) - 08:01, 17 August 2023
  • |interface4=USB2.0 ...h Raspberry Pi Compute Module 4. Although it is tiny, it can bring out the interface of Raspberry Pi Compute Module 4 with an onboard camera.
    5 KB (697 words) - 07:18, 24 February 2024
  • |USB2.0|| USB2.0 *CM3 interface: used to connect to the CM3 baseboard.
    2 KB (305 words) - 08:07, 17 August 2023
  • ...ng off-the-shelf components such as Raspberry Pi HAT and PCIe modules. Its interface is concentrated on the same side, which is convenient for users to use. ==USB2.0==
    4 KB (697 words) - 01:44, 7 December 2023
  • ...is a baseboard of Raspberry Pi Compute Module 4 with a 5V/2.5A USB Type C interface. #The Type C interface can be used as a power supply or as a USB SLAVE interface to burn the image.
    9 KB (1,398 words) - 14:56, 31 August 2023
  • |interface4=USB2.0 ...h Raspberry Pi Compute Module 4. Although it is tiny, it can bring out the interface of Raspberry Pi Compute Module 4.
    12 KB (1,884 words) - 09:34, 25 January 2024
  • 2: <font color="#ff0000">DSI interface is changed from DSI0 to DSI1, high resolution is supported</font><br> ...the DSI1 display interface is not connected. (V4 version starts to display interface for DSI1)<br>
    11 KB (1,717 words) - 10:10, 25 March 2024
  • *DSI interface is DSI1. |1||Micro USB||5V/2.5A power supply, can also be used as an eMMC programming interface
    9 KB (1,367 words) - 08:05, 26 October 2023
  • ...ne. The PoE pin Gigabit Ethernet port supports 4K output, onboard four-way USB2.0, 5-inch touch screen, etc. The all-in-one kit is convenient for users. ...USB SLAVE interface is used to burn the image and cannot be used as an OTG interface.<br>
    13 KB (2,002 words) - 10:32, 25 March 2024
  • 4. Connect the Micro USB/Type C interface (SLAVE port) of the carrier board to the host PC, then connect a power adap *Connect a power adapter to the Power interface.
    4 KB (619 words) - 06:00, 4 September 2023
  • ...the Raspberry Pi Compute Module 4. It is powered by a 5V/ 2.5A USB Type C interface. 2: <font color="#FF0000">The DSI interface is changed from DSI0 to DSI1, which already supports high resolution. </fon
    8 KB (1,284 words) - 06:59, 3 January 2024
  • #The Type C port can be used as a power supply or as a USB SLAVE interface to program images.<br> ...r supply of CM4, please do not connect other devices when using the Type C interface to program the image. <br>
    16 KB (2,581 words) - 06:52, 20 March 2024
  • Just like USB2.0 devices support USB3.0/USB2.0 interface;It can be connected to a 100M network port and is suitable for use. It is c {{FAQ|What should I do if the web configuration interface cannot be opened? |
    12 KB (1,919 words) - 08:23, 20 March 2024
  • ...nboard four isolated RS485 interfaces, 100M+1000M dual network ports, HDMI interface, two CSI interfaces, two USB interfaces, etc... #The Type C interface can be used as a power supply or as a USB interface to burn the image (need to use the DIP switch to switch).
    14 KB (2,130 words) - 07:56, 19 December 2023
  • |interface4 = USB2.0/3.0 ...rage drive. In this case, the Raspberry Pi 4 can be booted through the USB interface, which greatly improves the reading and writing speed and makes the boot sp
    6 KB (958 words) - 09:49, 14 November 2023
  • |caption=JTAG/SWD Debugger Programmer with Micro USB Interface JTAG/SWD Debugger Programmer with Micro USB Interface
    12 KB (2,081 words) - 03:26, 18 August 2023
  • |caption=DSI, CSI, micro HDMI, USB2.0/3.0 <br/>I2C, I2S, SPI, UART, RPi, Ethernet *2 × 4-lane MIPI DSI/CSI interface
    8 KB (1,166 words) - 01:29, 29 February 2024
  • ...also be used as the power supply interface, but cannot be used as the OTG interface.<br /> 5: <font color="#FF0000">USB2.0 is closed by default, if you want to open it, you need to add dtoverlay=dwc
    12 KB (2,000 words) - 10:15, 25 March 2024
  • ...r supply of CM4, please do not connect other devices when using the Type C interface to program the image. <br> 6: <font color="#ff0000">The USB2.0 interface is disabled by default, you should add line ''dtoverlay=dwc2,dr_mode=host''
    23 KB (3,628 words) - 08:41, 27 March 2024

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)