Search results
- *[[USB HUB HAT]] |USB 2.05 KB (817 words) - 05:53, 4 September 2023
- |caption=SWD, UART, USB-A ...ther peripherals. Provides different firmware for SWD port, UART port, and I2C port.3 KB (372 words) - 10:38, 8 September 2023
- |interface5=I2C ...h Raspberry Pi Compute Module 4. Although it is tiny, it can bring out the interface of Raspberry Pi Compute Module 4 with an onboard camera.5 KB (697 words) - 07:18, 24 February 2024
- *USB 3.0 x 2, USB 2.0 x 2 *CSI camera interface3 KB (465 words) - 02:39, 7 December 2023
- |interface5 = USB TO UART *<USB TO UART> CP2102, control the Pi through a serial terminal.3 KB (412 words) - 07:28, 1 September 2023
- |interface2=USB/I2C *Onboard dual touch circuit, optional USB Type-C or I2C touch, more application scenarios.<br/>7 KB (1,123 words) - 05:55, 1 February 2024
- |USB 2.0 |colspan=3 |1x Micro USB port (supports USB HUB expansion)4 KB (574 words) - 06:03, 4 September 2023
- |USB 2.0 |colspan=3 |1x Micro USB port (supports USB HUB expansion)4 KB (601 words) - 05:55, 4 September 2023
- ...0640 IR Array Thermal Imaging Camera, 32×24 Pixels, 55° Field of View, I2C Interface |interface1=I2C4 KB (622 words) - 09:23, 19 October 2023
- |USB 2.0 |colspan=3 |1x Micro USB port (supports USB HUB expansion)5 KB (720 words) - 03:35, 7 December 2023
- *Micro-USB power *Micro-USB OTG port5 KB (704 words) - 05:53, 4 September 2023
- |interface2 = USB 2.0 |interface3 = I2C9 KB (1,398 words) - 14:56, 31 August 2023
- Onboard 4-ch USB ports, Gigabit Ethernet port, headphone jack and PoE pin, Raspberry Pi CM4 *Onboard headphone jack (extended from USB).9 KB (1,367 words) - 08:05, 26 October 2023
- 2: <font color="#ff0000">DSI interface is changed from DSI0 to DSI1, high resolution is supported</font><br> 1: <font color="#ff0000">DO NOT unplug any devices other than HDMI and USB when powering on.</font><br>11 KB (1,717 words) - 10:10, 25 March 2024
- ...nd superior connectivity. Integrated with a PCIe link connecting USB 2 and USB 3 ports, along with a native Ethernet controller. It features greatly impro *USB 3.0 x 2, USB 2.0 x 25 KB (731 words) - 01:53, 7 December 2023
- 1: <font color=red>Do not plug and unplug any device except USB and HDMI while the baseboard is working.</font><br> ...s the USB SLAVE interface to burn the image, and cannot be used as the OTG interface.<br>7 KB (1,007 words) - 15:16, 31 August 2023
- |interface4 = USB ...network communication modes, and expands a variety of industrial isolated interface resources (such as CAN, RS485, RS232, ADC, GPIO, etc.), which is suitable f7 KB (915 words) - 15:15, 31 August 2023
- |caption=ESP32-S3<br/>I2C, UART, USB-A ...ts 2.4GHz WiFi and BLE 5, with integrated 16MB Flash & 2MB PSRAM, provides I2C port, UART port, and GPIO header, bringing more possibilities for your proj7 KB (1,141 words) - 01:43, 12 March 2024
- 1.<font color="#ff0000"> DO NOT hot-plug any devices except the USB and HDMI. </font><br/> 3. Micro USB is used as a USB SLAVE interface to write images, not as an OTG interface.<br/>7 KB (971 words) - 05:54, 4 September 2023
- *'''Compass''' – Freescale MAG3110 3-axis magnetometer, I2C interface *'''Accelerometer''' – Freescale MMA8652 3-axis accelerometer, I2C interface5 KB (838 words) - 10:18, 3 August 2018