Search results

...olor Graphic LCD, with the resistive touch screen, adopts an 8080 parallel interface for LCD communication and supports host controllers such as STM32.

*Interface: I2C '''PS''': This module has only I2C interface and only four pins

== Interface introduce == ...s bar of Google Chrome (other browsers may not be compatible), port number 8080.<br>

...e virtual machine and run the following command to start the image viewing interface. ...ual machine and run the rosrun rviz rviz or rviz command to start the RVIZ interface.

...e virtual machine and run the following command to start the image viewing interface. ...ual machine and run the rosrun rviz rviz or rviz command to start the RVIZ interface.

*Interface: I2C '''PS''': This module has only I2C interface and only four pins.

...onnect it to another hardware platform via the IIC and SPI interfaces. The interface of 2.23inch OLED HAT is the default SPI, you can also switch to I2C by sold *Interface: SPI/I2C/OLED

*Communication interface: I2C This OLED supports communication methods such as 8bit 8080 parallel, 8bit 6800 parallel, three-wire SPI, four-wire SPI, and I2C. Howev

! class="tittle-bg width20percent" | Communication interface ! class="tittle-bg width20percent" | Communication interface

|interface1 = 8080 LCD_WriteReg(0x0C, 0x0000); /* RGB interface setting */

#Computer monitor or TV with HDMI interface (other interface monitors can use interface converter.) ...ations to enter the system must use the command line. Since there is no UI interface, it is suitable for the small capacity of the TF card and the mastery of Li

*Support interface: 4-wire SPI, 3-wire SPI '''PS: This module only has SPI interface, please pay attention when using it.'''

...al, run successfully to return to the app front page, and visit localhost: 8080 to show the page: View to message and control debug interface received the message successfully.

|interface = SPI[[:interface:OLED|OLED]] *Support interface: 4-wire SPI/I2C

...2.4inch TFT display module with a resolution of 240 * 320, it uses the SPI interface for communication. LCD has an internal controller with basic functions, whi *Interface: SPI

...a 2-inch IPS display module with a resolution of 240 * 320, it uses an SPI interface for communication. The LCD has an internal controller with basic functions, *Interface: SPI

*Communication Interface：SPI/IIC ...etails, please refer to the demo description - bottom hardware interface - interface selection.'''

*Support interface: 4-wire SPI, 3-wire SPI '''PS: This module only has SPI interface, please pay attention when using it.'''

*Communication interface: SPI ...d other communication methods. This LCD uses a four-wire SPI communication interface, which can greatly save the GPIO port, and the communication speed will be

...related to the Linux system (including those required to run the graphical interface), such as ls, mkdir, rm, etc. *Used to display the network configuration details of an interface on the current system when run with no arguments (ie) ifconfig.<br/>