ESP32-S3-RS485-CAN-Web

From Waveshare Wiki
Jump to: navigation, search

Web Page Control

Use the Bluetooth debugging assistant on your mobile phone to connect to the ESP32-S3-Relay-1CH device, obtain the IP address after connecting to WIFI, and open the web page through the IP

AP Mode

  • Connect the ESP32-S3-RS485-CAN device to WIFI, with WIFI name ESP32-S3-RS485-CAN and password waveshare

ESP32-S3-RS485-CAN-TO-WIKI-Web-1.png

  • Get the current IP via Bluetooth debugging assistant
  • Open the Web page to control the RS485 and CAN port (it takes a short time to configure after the device is powered on, and it may be slow to open the Web page for the first time after each power-up)

ESP32-S3-RS485-CAN-TO-WIKI-Web-2.png

STA Mode

  • After the device is powered on, it will automatically connect to the set WIFI (you need to modify the WIFI to be connected before flashing the program
  • Get the current IP via Bluetooth debugging assistant
  • Open the Web page to control the RS485 and CAN port (it takes a short time to configure after the device is powered on, and it may be slow to open the Web page for the first time after each power-up)

ESP32-S3-RS485-CAN-TO-WIKI-Web-3.png

Retrieved from "https://www.waveshare.com/w/index.php?title=ESP32-S3-RS485-CAN-Web&oldid=104876"