ESP32-S3-POE-ETH-8DI-8RO-Web

From Waveshare Wiki
Jump to: navigation, search

Web Page Control

Use the Bluetooth debugging assistant on your mobile phone to connect to ESP32-S3-POE-ETH-8DI-8RO device, obtain the IP address after connecting to WIFI, and open the web page through the IP

AP Mode

  • Connect the ESP32-S3-POE-ETH-8DI-8RO device to WIFI, with WIFI name ESP32-S3-POE-ETH-8DI-8RO and password waveshare

ESP32-S3-POE-ETH-8DI-8RO TO Web 0.png.png

  • Get the current IP via Bluetooth debugging assistant
  • Open the Web page to control the relay (it takes a short time to configure after the device is powered on, and it may be slow to open the Web page for the first time after each power-up)

ESP32-S3-POE-ETH-8DI-8RO TO Web 1.png.png

STA Mode

  • After the device is powered on, it will automatically connect to the set WIFI (you need to modify the WIFI to be connected before flashing the program
  • Get the current IP via Bluetooth debugging assistant
  • Open the Web page to control the relay (it takes a short time to configure after the device is powered on, and it may be slow to open the Web page for the first time after each power-up)

ESP32-S3-POE-ETH-8DI-8RO TO Web 2.png.png

Retrieved from "https://www.waveshare.com/w/index.php?title=ESP32-S3-POE-ETH-8DI-8RO-Web&oldid=101125"