Atmel-ICE

From Waveshare Wiki
(Redirected from Atmel-ICE-C)
Jump to: navigation, search
Atmel-ICE
Atmel-ICE-list.jpg

debugging and programming Atmel SAM and AVR microcontrollers
Atmel-ICE-B2
Atmel-ICE-Basic-intro.jpg
Atmel-ICE-C
Atmel-ICE-C-4.jpg
{{{name4}}}

{{{name5}}}

{{{name6}}}

Introduction

Powerful development tool for debugging and programming Atmel SAM and AVR microcontrollers

More

Resources

FAQ

 Answer:
This product is compatible with AVRISP mkii. Refer to [1]

{{{5}}}


 Answer:
PCB with a white round silkscreen or square solder joint markings at pin 1, as shown in the figure:

Atmel-ICE-10PIN.jpg

{{{5}}}


 Answer:
  • Scattered head line JTAG and ISP serial number correspondence are as follows, scattered head above the mark 0 corresponds to the table above the serial number 1.

Atmel-ICE-Pins-number.jpg

  • ISP 6PIN interface number:

Atmel-ICE-ISP-interface.jpg

  • ISP 6PIN to ISP 10PIN:

Atmel-ICE-ISP6-to-ISP10.jpg
Note: the red cable is VCC.

{{{5}}}


 Answer:
In terms of the hardware, it supports while the computer should install the corresponding AVR Studio software (for example: the newest AVR Studio 7).

{{{5}}}


 Answer:
When using USB AVRISP XPII under AVR Studio6, there will often be a bug that requires re-plugging and unplugging the USB to be normal. How can I solve it?

USB AVRISP XPII002.jpg

Yes, there is such a problem with the software of AVR Studio6 sp1, you can install other versions, such as AVR Studio4 or AVR Studio 7. For a detailed description of this issue, see:

www.avrfreaks.net/forum/atmel-studio-6-programmer-busy


Support



Technical Support

If you need technical support or have any feedback/review, please click the Submit Now button to submit a ticket, Our support team will check and reply to you within 1 to 2 working days. Please be patient as we make every effort to help you to resolve the issue.
Working Time: 9 AM - 6 PM GMT+8 (Monday to Friday)