Atmel-ICE
From Waveshare Wiki
(Redirected from Atmel-ICE-B2)
| ||
| ||
| ||
Introduction
Powerful development tool for debugging and programming Atmel SAM and AVR microcontrollers
| More |
Resources
FAQ
Answer:
PCB with a white round silkscreen or square solder joint markings at pin 1, as shown in the figure:
{{{5}}}
Answer:
- Scattered head line JTAG and ISP serial number correspondence are as follows, scattered head above the mark 0 corresponds to the table above the serial number 1.
- ISP 6PIN interface number:
- ISP 6PIN to ISP 10PIN:
Note: the red cable is VCC.
{{{5}}}
Answer:
In terms of the hardware, it supports while the computer should install the corresponding AVR Studio software (for example: the newest AVR Studio 7).
{{{5}}}
Answer:
When using USB AVRISP XPII under AVR Studio6, there will often be a bug that requires re-plugging and unplugging the USB to be normal. How can I solve it?
Yes, there is such a problem with the software of AVR Studio6 sp1, you can install other versions, such as AVR Studio4 or AVR Studio 7. For a detailed description of this issue, see:
www.avrfreaks.net/forum/atmel-studio-6-programmer-busy
Support
Technical Support
If you need technical support or have any feedback/review, please click the Submit Now button to submit a ticket, Our support team will check and reply to you within 1 to 2 working days. Please be patient as we make every effort to help you to resolve the issue.
Working Time: 9 AM - 6 AM GMT+8 (Monday to Friday)