JTAG/SWD Debugger Programmer with Micro USB Interface
ARM Debugger is a debugger and programmer which supports the most popular ARM core MCUs including ARM7/9/11, Cortex-M0/M3/M4, etc.
- Onboard self-recovery fuse, prevent any damage from short circuit
- 3.3V output, make it easy to debug/program the code
- Universal Micro USB interface
- Protected by heat-shrink tube
- Unique ID, supports multi devices to work together at the same time
Functionality and Performance
- Supports full-speed running, single step, breakpoints, and so on. Check IO status, variable, etc.
- Quick response through the USB2.0 interface
- Programs FLASH ROM, EEPROM, AFR, etc.
- High-speed SWD programming through the USB2.0 interface
- Keil MDK-ARM
- IAR EWARM
- J-Flash ARM
- mikroC PRO for ARM
- nRFgo Studio (Version 1.15 OR before)
All the MCUs with SWD interface of the following cores: ARM7, ARM9, ARM11, Cortex-M0, Cortex-M3, and Cortex-M4.
Please note that the VCC and GND should be connected correctly to avoid any damage.