7inch Side Monitor

From Waveshare Wiki
Jump to: navigation, search
7inch Side Monitor W
7inch-side-monitor-w-1.jpg
7inch Side Monitor B
7inch-side-monitor-b-1.jpg

IPS, 1024x600
{{{name3}}}

{{{name4}}}

{{{name5}}}

Features

  • 7-inch IPS display with a hardware resolution of 1024x600.
  • All-metal CNC alloy case and the side monitor with a brightness of up to 500cd/m².
  • USB2.0 display signal, support power supply and display with one cable.
  • Support Windows 11/10/8.1/8/7.
  • Software configuration only is required for the first time and supports plug-and-play for subsequent usage.

Parameters

Item Description Unit
Model 7inch Side Monitor /
Dimensions 7.0 Inch
Viewing Angle 170 Deg
Resolution 1024x600 Pixels
Overall Dimensions 170.90(H)×106.60(V)×11.14(D) mm
Display Area 154.60(H)×86.32(V) mm
Color Gamut 58% NTSC
Default Brightness 500 cd/m²
Contrast 800:1 /
Refresh Rate 60 Hz
Power & Display Interface USB2.0 /
Default Power Consumption 2.7 Watt

Electrical Specification

Parameter Min. Value Standard Value Max. Value Unit Note
Input Voltage 4.7 5.00 5.25 V Note 1
Input Current 550 600 TBD mA Note 2
Operating Temperature 0 25 60 Note 3
Storage Temperature -10 25 70 Note 3
  • Note 1: Input voltage exceeding the maximum value or improper operation may cause permanent damage to the device.
  • Note 2: The input current must be ≥550mA, otherwise, it will cause startup failure or abnormal display, and it may cause permanent damage to the device if it is in an abnormal state for a long time.
  • Note 3: Please do not store the display in a high-temperature and high-humidity storage environment for a long time. The display must work within the limited value range, otherwise, the display may be damaged.

Usage Tutorial

Hardware Connection

Method 1: USB Type-C Connection

Note: Please ensure the USB interface provides sufficient power!! It is recommended to use the USB interface on the board first.
7inch Side Monitor-12.png

Mthod 2: USB 4PIN Port Connection

Windows-USB-Monitor-03.png Windows-USB-Monitor-04.png

Software Setting

Install Win USB Display Driver

  • 1. Download WinUSBDisplay driver program.
  • 2. Unzip it and run "WinUSBDisplay_Windows.exe".

① Please keep the default installation path "C:\Program Files\Win USB Display", and select "Next".
WXWorkCapture 111.png
② Click on "Install".
WXWorkCapture 12.png
NOTE! HERE SELECTS "NO" MANUALLY AND THEN CLICK ON ④ "FINISH".
WXWorkCapture 14075.png
④ Click to download and unzip config.ini, copy the "config.ini" file the default installation path "C:\Program Files\Win USB Display" in Step ①.
7inch Side Monitor-04.png
⑤ Now the software setting is finished, please restart the Windows system.
7inch Side Monitor-07.png
⑥ Restart to enter the system, wait for 30s, and then the 7-inch Side Monitor can be normally recognized and displays.
As shown in the figure below, enter "Display setting", set the side monitor as "Extended these displays", and select "1024 x 600 (Recommended)".
7inch Side Monitor-08.png

FAQ

 Answer:

The brightness is 500cd/m², and the power consumption is 5V 0.6A.

{{{5}}}


 Answer:

Please download and unzip config.ini. Copy "config.ini" to the default installation path "C:\Program Files\Win USB Display", reboot the system, and then the resolution is 1024x600.

{{{5}}}


 Answer:

1. Check Hardware Connection:
<1> Please ensure that the USB 2.0 interface provides sufficient power. Avoid using USB hubs or other extension devices whenever possible, as insufficient power supply may cause screen flickering or blackouts.
<2> It is recommended to connect the side monitor to the USB interface on the PC, or you can try to use the USB3.0 interface.
2. Check Software Setting:
<1> After rebooting the system, open "Display" setting, and click on "Detect" to check whether the side monitor is recognized.
<2> If it is recognized, please set the side monitor as "Extend these displays".
7inch Side Monitor-09.png
3. If the side monitor is not recognized, please enter "Device Manager" to check whether the "MS USB Display" driver is correctly loaded.
7inch Side Monitor-10.png
4. Enter "C:\Program Files", and check whether the "Win USB Display" folder exists;
5. Open the file folder and select View -> Show -> Hidden items; enter "C:\Users\UserName\AppData\Roaming\WinUsbDisplay", package all ".log" files and send them to our support team for help.
7inch Side Monitor-11.png

{{{5}}}


Support



Technical Support

If you need technical support or have any feedback/review, please click the Submit Now button to submit a ticket, Our support team will check and reply to you within 1 to 2 working days. Please be patient as we make every effort to help you to resolve the issue.
Working Time: 9 AM - 6 PM GMT+8 (Monday to Friday)