XCore407I

XCore407I STM32F4 Core Board STM32 MCU core board, STM32F407IGT6, IO expander, USB HS/FS, Ethernet, NandFlash

{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Primary Attribute Category: STM32 Development Boards {{{userDefinedInfo}}}: {{{userdefinedvalue}}} Brand: Waveshare

Website International: Waveshare website Chinese: 官方中文站点

Onboard Interfaces Ethernet USB USB FS USB HS

Related Products EVK407I XCore407I ST-LINK/V2 (EN) ST-LINK/V2 (CN) ST-LINK ST-LINK/V2 (mini) STLINK-V3MINI ARM Debugger STX-RLINK

Introduction

STM32 MCU core board, STM32F407IGT6, IO expander, USB HS/FS, Ethernet, NandFlash

More

Resources

• Schematic
• User Manual
• Demo

STM32 Software

IDE

• Keil MDK
• STM32CubeMX

Programmers

• Flash Loader for ISP
• STVP
• STM32 ST LINK Utility

USB Driver

• PL2303 Windows Driver
• ST-Link V2 USB Driver
• Virtual_COM_Port_Driver

Other Software

• Stlinkupgrade
• TCP UDP Debugger
• IpTool
• EMWToolBox_Setup
• BonjourSetup
• SecureCRT
• Camera test
• BusHound

STM32F4 Datasheets

• STM32F405_STM32F407-Datasheet.pdf
• STM32F427_STM32F429-Datasheet.pdf
• STM32F437_STM32F439-Datasheet.pdf
• STM32F4-Reference.pdf

Related Resources

IAP Source

• stm32f4 IAP USART
• stm32f4 IAP ETH

ST libraries

• STM32F4xx_DSP_StdPeriph_Lib.7z
• STM32F4_Eeprom_Emulation.7z
• STM32F417_ETH_SSL.7z
• STM32_I2C_CPAL.7z

Keil Device Package

• www.keil.com/dd2/pack/

UCOS Source

• UCGUI3.90_Source.zip

FAQ

Question: Why is the 2.8inch Resistive Touch LCD not displayed after programming the corresponding program?

 Answer:

Please try it with the latest 2.8inch Resistive Touch LCD example:

• 2.8inch Resistive Touch LCD Sample Program
  

Question:Using the sample demo of '30.Touch' can not work?

 Answer:

• Use the following routines if using the 7inch Capacitive Touch LCD (F) GT911 version:

TOUCH 1024x600 GT911 Demo Code

• Use the following routines if using the 4.3inch Capacitive Touch LCD GT911 version:

4.3inch Capacitive Touch LCD Demo Code

Support

If you require technical support, please go to the Support page and open a ticket.