WSTP11A

From Waveshare Wiki
Revision as of 04:02, 25 December 2020 by Waveshare-eng11 (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
WSTP11A
WSTP11A

Industrial Unibody Temperature Transmitter, Stainless Steel Probe, RS485 Bus
{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Primary Attribute
Category:
{{{userDefinedInfo}}}: {{{userdefinedvalue}}}
Brand:
Website
International: Website
Chinese: 中文网站
Onboard Interfaces
Related Products

Industrial Unibody Temperature Transmitter, High Accuracy, Stainless Steel Probe, Water-Proof & Dust-Proof, RS485 Bus

Features

  • Digital output, via RS485 (standard Modbus-RTU protocol)
  • Wide range input voltage, non-linear correction, high accuracy
  • Small size, light weight, easy installation
  • Lightning-proof,cut-off frequency interference design, strong anti-interference capability
  • Reverse proof, over voltage protection, and current limited protection
  • Measurement accuracy up to 0.5% FS

Specification

  • Measured Medium:Liquid, gas
  • Accuracy: 0.5%FS
  • Full weight: 180g
  • Stability: ±0.1% FS/year
  • Measurement range: -50~100℃
  • Protection rating: IP65
  • Power supply: 12~36V DC
  • Ambient temperature: -40~85℃
  • Output signal: RS485 (standard Modbus-RTU protocol)
  • Ambient humidity:0%~95% RH(non-condensing, non-frosting)
  • Material:
    • Probe: 304 stainless steel (contacted)
    • Intermediate junction: 304 stainless steel (contacted)
    • Shell: 304 stainless steel
    • Hirschmann connector: ABS engineering plastics

Interface

Hesman interface
1 V+(12V~36V)
2 A
3 V-(GND)
4(Gnd.png) B

If you require technical support, please go to the Support page and open a tickets.