WM8960 Audio HAT
From Waveshare Wiki
| ||
Introduction
WM8960 Stereo CODEC Audio Module, Low Power, Play/Record
Resources
Documents
Codes
3D Drawing
FAQ
Answer:
- Check the kernel version first
uname -a
- If the kernel version of your system is lower than 5.0 (that is, the Raspberry Pi system version is before 2020-05-27), please download the following driver:
git clone -b rpi-4.9.y https://github.com/waveshare/WM8960-Audio-HAT.git
- If the kernel version is higher than 5.0, please download the following driver:
git clone https://github.com/waveshare/WM8960-Audio-HAT
【Note】Please do not run both of the above two commands!
{{{5}}}
Answer:
Please run the following command to restart the sound card service and test it again.
sudo systemctl restart wm8960-soundcard.service
{{{5}}}
Support
Support
If you require technical support, please go to the Support page and open a ticket.