USB TO SATA
From Waveshare Wiki
Revision as of 06:22, 14 March 2022 by Waveshare-eng11 (talk | contribs) (Created page with "{{Infobox item |img=300px|link=https://www.waveshare.com/usb-to-sata.htm| USB TO SATA |caption=USB-C Adapter For NGFF SSD, USB3.2 Gen2 Type-C |categ...")
| ||
Introduction
USB-C Adapter For NGFF SSD, USB3.2 Gen2 Type-C
Features
- Controller: VL716
- Interface type: SATA
- USB Type: USB 3.0
- Supported OS: Win7/8/8.10, Mac, Linux, Android
- Cable Length: About 15cm
- Indicator: Flash red when writing/reading
- Supported SSD: 2230 / 2242 / 2260 / 2280, etc M,2 SSD.
- [[File:USB-TO-SATA-details-9.jpg|500px]
Notices
- To use with PC or Raspberry Pi, you can just connect the adapter by USB cable
- When using a phone, please use OTG cable.
- Some of the phones and PC couldn't supply enough power to the USB ports, and it causes frame/speed drop problems. USB 3.0 port is recommended.
- If you want to use Type C to Type C cable, need to remove the two CC resistors on the backside， otherwise, it cannot work.
- This adapter can only support M.2 SATA interface. Could not be used with NVME SSD.
Dimensions
FAQ
Support
Support
If you require technical support, please go to the Support page and open a ticket.