USB TO SATA

USB TO SATA USB-C Adapter For NGFF SSD, USB3.2 Gen2 Type-C

{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Primary Attribute Category: Modules, USB {{{userDefinedInfo}}}: {{{userdefinedvalue}}} Brand: Waveshare

Website International: Website Chinese: [1]

Onboard Interfaces USB RS232 RS485 UART

Related Products

Introduction

USB-C Adapter For NGFF SSD, USB3.2 Gen2 Type-C

Features

• Controller: VL716
• Interface type: SATA
• USB Type: USB 3.0
• Supported OS: Win7/8/8.10, Mac, Linux, Android
• Cable Length: About 15cm
• Indicator: Flash red when writing/reading
• Supported SSD: 2230 / 2242 / 2260 / 2280, etc M,2 SSD.

[[File:USB-TO-SATA-details-9.jpg|500px]

Notices

• To use with PC or Raspberry Pi, you can just connect the adapter by USB cable
• When using a phone, please use OTG cable.
• Some of the phones and PC couldn't supply enough power to the USB ports, and it causes frame/speed drop problems. USB 3.0 port is recommended.
• If you want to use Type C to Type C cable, need to remove the two CC resistors on the backside， otherwise, it cannot work.
• This adapter can only support M.2 SATA interface. Could not be used with NVME SSD.

Dimensions

Support

If you require technical support, please go to the Support page and open a ticket.