Difference between revisions of "USB TO SATA"

From Waveshare Wiki
Jump to: navigation, search
(Created page with "{{Infobox item |img=300px|link=https://www.waveshare.com/usb-to-sata.htm| USB TO SATA |caption=USB-C Adapter For NGFF SSD, USB3.2 Gen2 Type-C |categ...")
 
m (Text replacement - "{{#urlget:amazon|default}}=display" to "{{#ifeq: {{#urlget:amazon|0}}|{{#urlget:Amazon|0}}| default|}}=display")
Line 4: Line 4:
 
|category=[[:Category:Modules|Modules]], [[:Category:USB|USB]]
 
|category=[[:Category:Modules|Modules]], [[:Category:USB|USB]]
 
|brand=Waveshare
 
|brand=Waveshare
|{{#urlget:amazon|default}}=display
+
|{{#ifeq: {{#urlget:amazon|0}}|{{#urlget:Amazon|0}}| default|}}=display
 
|website_cn=[https://www.waveshare.net/shop/]
 
|website_cn=[https://www.waveshare.net/shop/]
 
|website_en=[https://www.waveshare.com/usb-to-sata.htm Website]
 
|website_en=[https://www.waveshare.com/usb-to-sata.htm Website]

Revision as of 06:56, 16 May 2022

USB TO SATA
USB TO SATA

USB-C Adapter For NGFF SSD, USB3.2 Gen2 Type-C
{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Introduction

USB-C Adapter For NGFF SSD, USB3.2 Gen2 Type-C

Features

  • Controller: VL716
  • Interface type: SATA
  • USB Type: USB 3.0
  • Supported OS: Win7/8/8.10, Mac, Linux, Android
  • Cable Length: About 15cm
  • Indicator: Flash red when writing/reading
  • Supported SSD: 2230 / 2242 / 2260 / 2280, etc M,2 SSD.
[[File:USB-TO-SATA-details-9.jpg|500px]

Notices

  • To use with PC or Raspberry Pi, you can just connect the adapter by USB cable
  • When using a phone, please use OTG cable.
  • Some of the phones and PC couldn't supply enough power to the USB ports, and it causes frame/speed drop problems. USB 3.0 port is recommended.
  • If you want to use Type C to Type C cable, need to remove the two CC resistors on the backside, otherwise, it cannot work.
  • This adapter can only support M.2 SATA interface. Could not be used with NVME SSD.

Dimensions

USB-TO-SATA-details-size.jpg

FAQ

Support

Support

If you require technical support, please go to the Support page and open a ticket.