Difference between revisions of "USB TO AUDIO"
From Waveshare Wiki
(Created page with "{{infobox item |img=300px|alt=USB TO AUDIO |link=https://www.waveshare.com/usb-to-audio.htm |category=Raspberry Pi,:...") |
(No difference)
|
Revision as of 04:03, 13 January 2021
| ||
This is an USB sound card, support recording and playback, stereo codec, built-in microhpne and speaker. It is suitable for Raspberry Pi/ Jetson Nano. driver-freen, plug and play.
Features
- Onboard Power indicators for checking working status.
- Onboard microphone and speaker, support audio input/output
- Driver-free, plug, and play. Compatible with Windows, Mac OS, Linux, and Android.
- Standard USB 2.0 port, portable size.
Specification
- Power voltage:5V
- Audo Encoder/Decoder:SSS1629A5
- Control port:USB
- Audio port:PH2.0
- Seakper driver:2.6W per channel (4Ω BTL)
Working with Raspberry Pi
Hardware configuratoin
- Raspberry Pi x1
- Speaker
- USB TO AUDIO
Play and record
- Right-click the Audio logo of Raspberry Pi ->Choose USB PnP Audio Device->Play or recording
Configure volume
- Right-click USB Device Settings->The left spider is the volume of the speaker and the right one is microphone.
Working with PC
- Connect the USB TO AUDIO to PC and it will be auto-recognized as a USB audio device.
- Open the Control panel. choose Hardware and Sound-> Sound -> Recording and a USB microphone is listed.
- Connect speaker to the USB TO AUDIO , please keep the speaker away from the USB TO AUDIO module
Right-Click Microphone -> Properties -> Listen and set it as below:
- Try to say to the microphone and check if the speaker works normally. Please keep the speaker away from the USB TO AUDIO Module, or it causes echo problem.