Difference between revisions of "USB HUB HAT (B)"

From Waveshare Wiki
Jump to: navigation, search
(Created page with "{{Infobox item |name=USB HUB HAT (B) |img=link=http://www.waveshare.com/usb-hub-hat-b.htm |caption=4 Port USB HUB HAT for Raspberry Pi Zero...")
 
 
Line 1: Line 1:
 
{{Infobox item
 
{{Infobox item
 
|name=USB HUB HAT (B)
 
|name=USB HUB HAT (B)
 +
|name2=USB-HUB-BOX
 
|img=[[File:USB-HUB-HAT-B-1.jpg|400px|link=http://www.waveshare.com/usb-hub-hat-b.htm]]
 
|img=[[File:USB-HUB-HAT-B-1.jpg|400px|link=http://www.waveshare.com/usb-hub-hat-b.htm]]
 +
|img2=[[File:USB-HUB-BOX-details-1.jpg|400px|link=http://www.waveshare.com/usb-hub-box.htm]]
 
|caption=4 Port USB HUB HAT for Raspberry Pi Zero / Zero W, USB to UART Onboard
 
|caption=4 Port USB HUB HAT for Raspberry Pi Zero / Zero W, USB to UART Onboard
 
|category=[[:Category:Expansions|Expansions]], [[:Category:Raspberry Pi|Raspberry Pi]]
 
|category=[[:Category:Expansions|Expansions]], [[:Category:Raspberry Pi|Raspberry Pi]]
Line 27: Line 29:
 
=== Documentation ===
 
=== Documentation ===
 
*[https://www.waveshare.com/w/upload/5/5c/USB_HUB_HAT_%28B%29_SchDoc.pdf Schematic]
 
*[https://www.waveshare.com/w/upload/5/5c/USB_HUB_HAT_%28B%29_SchDoc.pdf Schematic]
 +
*[https://www.waveshare.com/w/upload/4/4d/USB-HUB-BOX-Assembly.jpg USB-HUB-BOX Assembly]
 
=== Software ===
 
=== Software ===
 
*[[:File:CP210x_USB_TO_UART.zip|CP2102 Driver]]
 
*[[:File:CP210x_USB_TO_UART.zip|CP2102 Driver]]

Latest revision as of 07:01, 26 November 2021

USB HUB HAT (B)
USB-HUB-HAT-B-1.jpg

4 Port USB HUB HAT for Raspberry Pi Zero / Zero W, USB to UART Onboard
USB-HUB-BOX
USB-HUB-BOX-details-1.jpg
{{{name3}}}

{{{name4}}}

{{{name5}}}

Primary Attribute
Category: Expansions, Raspberry Pi
{{{userDefinedInfo}}}: {{{userdefinedvalue}}}
Brand: Waveshare
Website
International: Website
Chinese: 官网
Onboard Interfaces
RPi USB
Related Products

Introduction

4 Port USB HUB HAT for Raspberry Pi Zero / Zero W, USB to UART Onboard

More

Pinout

USB-HUB-HAT-B-details-7.jpg
  • The lEDs turn on if USB ports are enumerated successfully.

Hardware connection

  • To use with Raspberry Pi zero, the HUB HAT works with ejector pins
  • To use with other Raspberry Pi, the HUB HAT should be connected with USB cable
USB-HUB-HAT-B-details-3.jpg

Resources

Documentation

Software

3D Drawing

Support

If you require technical support, please go to the Support page and open a tickets.