USB AVRISP CH

From Waveshare Wiki
Jump to: navigation, search

[中文]

USB-AVRISP-CH
USB AVRISP CH

Introduction

  • AVR ISP Programmer, compatible with AT AVRISP from ATMEL, supports AVR Studio 4/5/6/7
  • AVR ISP Programmer, compatible with AT AVRISP from ATMEL
  • A professional low cost In-System Programmer. Programs FLASH , EEPROM, Fuses, and Lock Bit through USB
More

Resources

FAQ

 Answer:
  • The PC may identify the USB AVRISP CH as a USB-to-COM interface. Normally, most PCs may have this driver:
    File:USB-AVRISP-CH-1.png
  • If the PC cannot identify the USB AVRISP CH, you can install this driver to your PC: Click here to download

Notice:

If the COM port occupied by the USB AVRISP CH is out of the range of COM1~COM4 (In this example, it is COM6 as the figure above shows), please modify the relative COM port number to the range of COM1~COM4, so that the USB AVRISP CH can work properly.
{{{3}}}
{{{4}}}

{{{5}}}


Support

Support

If you require technical support, please go to the Support page and open a ticket.