USB-CAN-B
| ||
Introduction
USB-CAN-B is an industrial high-performance USB to CAN adapter, CAN-bus communication interface card and CAN protocol data analyzer. Integrating dual independent channels with electrical isolation and multiple protection circuits. Supports Windows and Linux systems, comes with drivers, CANTools related software, secondary development examples and tutorials. It can be connected to the PC or industrial control host via USB port to realize transceiver control, data analysis, collection and monitoring of CAN bus network. Compact in size and easy to use, which can be used for learning and debugging of CAN bus, and secondary developmentand integration into various industrial, power communication and intelligent control applications that require CAN bus communication.
Documentation
- USB-CAN-B Manual
- Interface Function Library User Instruction
- USB-CAN TOOL Debugging Software User Manual
Software
- USB-CAN-B TOOL_EN
- USB-CAN-B Driver_installation_(Tool_SetupV1.40)
- USB-CAN-B Usb_Drivers(Manual installation)
Demo
FAQ
Take 2-CH CAN FD HAT as an example, the test steps are as follows“
- Hardware connection:
sudo apt-get install can-utils sudo ip link set can0 up type can bitrate 1000000 candump can0 cansend can0 000#11.22.33.44
Support access to mainstream Linux system motherboards, take Raspberry Pi 4B as an example:
wget https://www.waveshare.com/w/upload/1/17/USB-CAN-B_Raspberry.zip unzip USB-CAN-B_Raspberry.zip sudo chmod 777 -R USB-CAN-B_Raspberry cd USB-CAN-B_Raspberry sudo make clean sudo make sudo ./hello_cpp
Support
If you require technical support, please go to the Support page and open a ticket.