UART GPS NEO-6M-C

From Waveshare Wiki
Revision as of 02:47, 14 March 2015 by Wiki Editorial Team (talk | contribs) (Created page with "Category:Modules http://www.waveshare.net/wiki/UART_GPS_NEO-6M-C 中文 ==Resources== <div class="thumb tright"> <div class="thumbinner" style...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

[中文]

Resources

<htmltag tagname="a" href="http://www.waveshare.com/product/UART-GPS-NEO-6M-C.htm" target="_blank" title="Introduction"> <htmltag tagname="img" alt="UART-GPS-NEO-6M-C" src="http://www.waveshare.com/img/preview/UART-GPS-NEO-6M-C_L.jpg" width="300" height="225" class="thumbimage"> </htmltag>

<htmltag tagname="a" href="http://www.waveshare.com/img/preview/UART-GPS-NEO-6M-C_L.jpg" target="_blank" class="internal" title="Full View"> <htmltag tagname="img" src="/wiki/skins/common/images/magnify-clip.png" width="15" height="11" alt=""> </htmltag>

UART GPS NEO-6M-C

FAQ

 Answer:
  1. Start the u-center to configure the settings of Port and Baud rate
  2. Select View->Messages View, and then a window will pop out. Select UBX->CFG(Config)->RATE(Rates)
  3. Enter “200” in the option Measurement Period
  4. Click the button Send to transmit the command to the GPS module. Now, the update rate is modified to 5Hz.
  5. For data save on power down, select UBX->CFG(Config)->CFG(Configuration)
  6. Select the option Save current configuration, and then choose the option 2-I2C-EEPROM in the Devices box.
  7. Click the button Send to save the current configuration to EEPROM.
{{{3}}}
{{{4}}}

{{{5}}}


 Answer:
  1. Select View->Messages View, and then a window will pop out. Select UBX->CFG(Config)->PRT(Ports)
  2. Set a new Baud rate in the option Baudrate
  3. Click the button Send to transmit the command to the GPS module. Now, the Baud rate is modified to the new setting.
{{{3}}}
{{{4}}}

{{{5}}}


 Answer:
  1. Select View->Messages View, and then a window will pop out. Select UBX->CFG(Config)->MSG(Messages)
  2. Select the outputted information in the option Messages View, such as F0-01 NMEA GxGLL
  3. If the option UART1 is deselected, this information will be masked.Click the button Send to transmit the command to the GPS module. Now, this information is masked.
{{{3}}}
{{{4}}}

{{{5}}}


 Answer:
  1. Select View->Messages View, and then a window will pop out. Select UBX->CFG(Config)->TP(Timepulse)
  2. Configure the setting in the option Pulse Lenth
  3. Click the button Send to transmit the command to the GPS module. Now, the outputted clock pulse is modified to the new setting.
{{{3}}}
{{{4}}}

{{{5}}}


Support

Support

If you require technical support, please go to the Support page and open a ticket.