UART GPS NEO-6M-C
From Waveshare Wiki
Revision as of 01:47, 14 April 2015 by Wiki Editorial Team (talk | contribs) (Text replace - "|Application notes" to "|Datasheets")
[中文]
Resources
<htmltag tagname="a" href="http://www.waveshare.com/product/UART-GPS-NEO-6M-C.htm" target="_blank" title="Introduction"> <htmltag tagname="img" alt="UART-GPS-NEO-6M-C" src="http://www.waveshare.com/img/preview/UART-GPS-NEO-6M-C_L.jpg" width="300" height="225" class="thumbimage"> </htmltag>
FAQ
Answer:
- Start the u-center to configure the settings of Port and Baud rate
- Select View->Messages View, and then a window will pop out. Select UBX->CFG(Config)->RATE(Rates)
- Enter “200” in the option Measurement Period
- Click the button Send to transmit the command to the GPS module. Now, the update rate is modified to 5Hz.
- For data save on power down, select UBX->CFG(Config)->CFG(Configuration)
- Select the option Save current configuration, and then choose the option 2-I2C-EEPROM in the Devices box.
- Click the button Send to save the current configuration to EEPROM.
{{{5}}}
Answer:
- Select View->Messages View, and then a window will pop out. Select UBX->CFG(Config)->PRT(Ports)
- Set a new Baud rate in the option Baudrate
- Click the button Send to transmit the command to the GPS module. Now, the Baud rate is modified to the new setting.
{{{5}}}
Answer:
- Select View->Messages View, and then a window will pop out. Select UBX->CFG(Config)->MSG(Messages)
- Select the outputted information in the option Messages View, such as F0-01 NMEA GxGLL
- If the option UART1 is deselected, this information will be masked.Click the button Send to transmit the command to the GPS module. Now, this information is masked.
{{{5}}}
Answer:
- Select View->Messages View, and then a window will pop out. Select UBX->CFG(Config)->TP(Timepulse)
- Configure the setting in the option Pulse Lenth
- Click the button Send to transmit the command to the GPS module. Now, the outputted clock pulse is modified to the new setting.
{{{5}}}
Support
Support
If you require technical support, please go to the Support page and open a ticket.