Difference between revisions of "Template:USB-Camera-Guides"
From Waveshare Wiki
| Line 61: | Line 61: | ||
*Dimension：38.00 × 35.80 mm | *Dimension：38.00 × 35.80 mm | ||
*Support OS：Windows、Linux、MacOS | *Support OS：Windows、Linux、MacOS | ||
| + | |||
|IMX335 5MP USB Camera (A)= | |IMX335 5MP USB Camera (A)= | ||
*Pixel：500 Megapixel | *Pixel：500 Megapixel | ||
| Line 126: | Line 127: | ||
*Dimension：9mm×62mm | *Dimension：9mm×62mm | ||
*Support OS：Windows、Linux | *Support OS：Windows、Linux | ||
| + | |||
| + | |OV5640 5MP USB Camera= | ||
| + | *Pixel：500 Megapxixel | ||
| + | *Resolution：2592×1944 | ||
| + | *Video: | ||
| + | **15FPS 2592 x 1944 | ||
| + | **30FPS 1920 x 1080 | ||
| + | **30FPS 1280 x 720 | ||
| + | *Sensor：OV5640 | ||
| + | *DSP ：Automatic white balance(AWB)\Automatic exposure(AEC)\Automatic gain control(AGC) | ||
| + | *Camera Specification： | ||
| + | **CCD Size：1/4inch | ||
| + | **Aperture（F）：2.8 | ||
| + | **Focus Length（EFL）：3.29mm | ||
| + | **Field of View（FOV）：68° | ||
| + | *Interface：USB2.0 | ||
| + | *Image Format：MJPEG、YUV422 | ||
| + | *Working Temperature：0°C ~ 50°C | ||
| + | *Dimension：9mm×62mm | ||
| + | *Support OS：Windows、Linux | ||
| + | |||
|Default= | |Default= | ||
| Line 138: | Line 160: | ||
*Click the setting icon of the top-left to configure the image/video. | *Click the setting icon of the top-left to configure the image/video. | ||
:[[File:usb-camera-manual-1.png|700px]] | :[[File:usb-camera-manual-1.png|700px]] | ||
| − | *You can click the icons | + | *You can click the icons on the right to switch between Image Capture or Video Recording. |
; AMCap Software | ; AMCap Software | ||
*Download and install the AMCap software | *Download and install the AMCap software | ||
| − | *You can click the | + | *You can click the Options option, choose Video Capture Pin... or Still Capture Pin... to configure image/video |
:[[File:usb-camera-manual-2.jpg|700px]] | :[[File:usb-camera-manual-2.jpg|700px]] | ||
Revision as of 03:09, 18 March 2022
Specification
Working with Windows PC
Test Software
Most of the Windows 10 PC has pre-install Camera software, you can use it to test the USB camera
If your PC doesn't have Camera software, you can also download the AMCap test software from Resouces->Software and test.
Testing
- Use Camera software of Windows
- Search "Camera" and open the software
- Click the setting icon of the top-left to configure the image/video.
- You can click the icons on the right to switch between Image Capture or Video Recording.
- AMCap Software
- Download and install the AMCap software
- You can click the Options option, choose Video Capture Pin... or Still Capture Pin... to configure image/video
Working with Raspberry Pi
- Open a terminal of Raspberry Pi （You can use Ctrl+Alt+T shortcut）
- Ues command sudo raspi-config to open the configuration
- Choose Interface Option -> Camera -> Yes to enable camera and reboot.
- Open a Terminal of Pi and install luvcview tool with the following command
- sudo apt-get install luvcview -y
- After installing, use the following command to test the USB camera.
- sudo luvcview -s 1920x1080
Working with Jetson Nano Developer Kit
- Open a terminal of Jetson Nano Developer Kit （You can use Ctrl+Alt+T shortcut or open it by Mouse）
- Use the following command for previewing：
- nvgstcapture-1.0 --camsrc=0
- With the command, a preview window is opened
【Notice】You may need to use the camera by script/codes, in this case, you can refer to tools/libraries like Opencv yourself.