Difference between revisions of "Template:UART-GPS-NEO-FAQ"

From Waveshare Wiki
Jump to: navigation, search
(Created page with "<font color="#008DE6">How to modify the update rate?</font> # Start the u-center to configure the settings of Port and Baud rate # Select View->Messages View, and then a windo...")
 
m (Text replace - "{{FAQ box" to "{{FAQ")
 
(3 intermediate revisions by the same user not shown)
Line 1: Line 1:
<font color="#008DE6">How to modify the update rate?</font>
+
{{FAQ|How to modify the update rate?|
 
# Start the u-center to configure the settings of Port and Baud rate
 
# Start the u-center to configure the settings of Port and Baud rate
 
# Select View->Messages View, and then a window will pop out. Select UBX->CFG(Config)->RATE(Rates)
 
# Select View->Messages View, and then a window will pop out. Select UBX->CFG(Config)->RATE(Rates)
# Enter “200” in the option Measurement Period  
+
# Enter “200” in the option '''Measurement Period'''
 
# Click the button Send to transmit the command to the GPS module. Now, the update rate is modified to 5Hz.
 
# Click the button Send to transmit the command to the GPS module. Now, the update rate is modified to 5Hz.
 
# For data save on power down, select UBX->CFG(Config)->CFG(Configuration)
 
# For data save on power down, select UBX->CFG(Config)->CFG(Configuration)
# Select the option Save current configuration, and then choose the option 2-I2C-EEPROM in the Devices box.
+
# Select the option '''Save current configuration''', and then choose the option '''2-I2C-EEPROM''' in the '''Devices''' box.
 
# Click the button Send to save the current configuration to EEPROM.
 
# Click the button Send to save the current configuration to EEPROM.
 
+
}}
<font color="#008DE6">How to set the Baud rate?</font>
+
{{FAQ|How to set the Baud rate?|
 
# Select View->Messages View, and then a window will pop out. Select UBX->CFG(Config)->PRT(Ports)
 
# Select View->Messages View, and then a window will pop out. Select UBX->CFG(Config)->PRT(Ports)
# Set a new Baud rate in the option Baudrate  
+
# Set a new Baud rate in the option '''Baudrate'''
 
# Click the button Send to transmit the command to the GPS module. Now, the Baud rate is modified to the new setting.
 
# Click the button Send to transmit the command to the GPS module. Now, the Baud rate is modified to the new setting.
 
+
}}
<font color="#008DE6">How to set the outputted information?</font>
+
{{FAQ|How to set the outputted information?|
 
# Select View->Messages View, and then a window will pop out. Select UBX->CFG(Config)->MSG(Messages)
 
# Select View->Messages View, and then a window will pop out. Select UBX->CFG(Config)->MSG(Messages)
# Select the outputted information in the option Messages View, such as F0-01 NMEA GxGLL
+
# Select the outputted information in the option '''Messages View''', such as F0-01 NMEA GxGLL
# If the option UART1 is deselected, this information will be masked.
+
# If the option '''UART1''' is deselected, this information will be masked.Click the button Send to transmit the command to the GPS module. Now, this information is masked.
Click the button Send to transmit the command to the GPS module. Now, this information is masked.
+
}}
 
+
{{FAQ
<font color="#008DE6">How to set clock pulse (PPS)?</font>
+
|How to set clock pulse (PPS)?|
 
# Select View->Messages View, and then a window will pop out. Select UBX->CFG(Config)->TP(Timepulse)
 
# Select View->Messages View, and then a window will pop out. Select UBX->CFG(Config)->TP(Timepulse)
# Configure the setting in the option Pulse Lenth  
+
# Configure the setting in the option '''Pulse Lenth'''
 
# Click the button Send to transmit the command to the GPS module. Now, the outputted clock pulse is modified to the new setting.
 
# Click the button Send to transmit the command to the GPS module. Now, the outputted clock pulse is modified to the new setting.
 +
}}

Latest revision as of 10:10, 6 November 2015

 Answer:
  1. Start the u-center to configure the settings of Port and Baud rate
  2. Select View->Messages View, and then a window will pop out. Select UBX->CFG(Config)->RATE(Rates)
  3. Enter “200” in the option Measurement Period
  4. Click the button Send to transmit the command to the GPS module. Now, the update rate is modified to 5Hz.
  5. For data save on power down, select UBX->CFG(Config)->CFG(Configuration)
  6. Select the option Save current configuration, and then choose the option 2-I2C-EEPROM in the Devices box.
  7. Click the button Send to save the current configuration to EEPROM.
{{{3}}}
{{{4}}}

{{{5}}}


 Answer:
  1. Select View->Messages View, and then a window will pop out. Select UBX->CFG(Config)->PRT(Ports)
  2. Set a new Baud rate in the option Baudrate
  3. Click the button Send to transmit the command to the GPS module. Now, the Baud rate is modified to the new setting.
{{{3}}}
{{{4}}}

{{{5}}}


 Answer:
  1. Select View->Messages View, and then a window will pop out. Select UBX->CFG(Config)->MSG(Messages)
  2. Select the outputted information in the option Messages View, such as F0-01 NMEA GxGLL
  3. If the option UART1 is deselected, this information will be masked.Click the button Send to transmit the command to the GPS module. Now, this information is masked.
{{{3}}}
{{{4}}}

{{{5}}}


 Answer:
  1. Select View->Messages View, and then a window will pop out. Select UBX->CFG(Config)->TP(Timepulse)
  2. Configure the setting in the option Pulse Lenth
  3. Click the button Send to transmit the command to the GPS module. Now, the outputted clock pulse is modified to the new setting.
{{{3}}}
{{{4}}}

{{{5}}}