Difference between revisions of "Template:UART-GPS-NEO-FAQ"
From Waveshare Wiki
| Line 1: | Line 1: | ||
| − | + | {{FAQ box|How to modify the update rate?| | |
# Start the u-center to configure the settings of Port and Baud rate | # Start the u-center to configure the settings of Port and Baud rate | ||
# Select View->Messages View, and then a window will pop out. Select UBX->CFG(Config)->RATE(Rates) | # Select View->Messages View, and then a window will pop out. Select UBX->CFG(Config)->RATE(Rates) | ||
| Line 7: | Line 7: | ||
# Select the option '''Save current configuration''', and then choose the option '''2-I2C-EEPROM''' in the '''Devices''' box. | # Select the option '''Save current configuration''', and then choose the option '''2-I2C-EEPROM''' in the '''Devices''' box. | ||
# Click the button Send to save the current configuration to EEPROM. | # Click the button Send to save the current configuration to EEPROM. | ||
| − | + | }} | |
| − | + | {{FAQ box|How to set the Baud rate?| | |
# Select View->Messages View, and then a window will pop out. Select UBX->CFG(Config)->PRT(Ports) | # Select View->Messages View, and then a window will pop out. Select UBX->CFG(Config)->PRT(Ports) | ||
# Set a new Baud rate in the option '''Baudrate''' | # Set a new Baud rate in the option '''Baudrate''' | ||
# Click the button Send to transmit the command to the GPS module. Now, the Baud rate is modified to the new setting. | # Click the button Send to transmit the command to the GPS module. Now, the Baud rate is modified to the new setting. | ||
| − | + | }} | |
| − | + | {{FAQ box|How to set the outputted information?| | |
# Select View->Messages View, and then a window will pop out. Select UBX->CFG(Config)->MSG(Messages) | # Select View->Messages View, and then a window will pop out. Select UBX->CFG(Config)->MSG(Messages) | ||
# Select the outputted information in the option '''Messages View''', such as F0-01 NMEA GxGLL | # Select the outputted information in the option '''Messages View''', such as F0-01 NMEA GxGLL | ||
# If the option '''UART1''' is deselected, this information will be masked.Click the button Send to transmit the command to the GPS module. Now, this information is masked. | # If the option '''UART1''' is deselected, this information will be masked.Click the button Send to transmit the command to the GPS module. Now, this information is masked. | ||
| − | + | }} | |
| − | + | {{FAQ box | |
| + | |How to set clock pulse (PPS)?| | ||
# Select View->Messages View, and then a window will pop out. Select UBX->CFG(Config)->TP(Timepulse) | # Select View->Messages View, and then a window will pop out. Select UBX->CFG(Config)->TP(Timepulse) | ||
# Configure the setting in the option '''Pulse Lenth''' | # Configure the setting in the option '''Pulse Lenth''' | ||
# Click the button Send to transmit the command to the GPS module. Now, the outputted clock pulse is modified to the new setting. | # Click the button Send to transmit the command to the GPS module. Now, the outputted clock pulse is modified to the new setting. | ||
| + | }} | ||
Revision as of 10:35, 18 August 2015
Answer:
- Start the u-center to configure the settings of Port and Baud rate
- Select View->Messages View, and then a window will pop out. Select UBX->CFG(Config)->RATE(Rates)
- Enter “200” in the option Measurement Period
- Click the button Send to transmit the command to the GPS module. Now, the update rate is modified to 5Hz.
- For data save on power down, select UBX->CFG(Config)->CFG(Configuration)
- Select the option Save current configuration, and then choose the option 2-I2C-EEPROM in the Devices box.
- Click the button Send to save the current configuration to EEPROM.
{{{5}}}
Answer:
- Select View->Messages View, and then a window will pop out. Select UBX->CFG(Config)->PRT(Ports)
- Set a new Baud rate in the option Baudrate
- Click the button Send to transmit the command to the GPS module. Now, the Baud rate is modified to the new setting.
{{{5}}}
Answer:
- Select View->Messages View, and then a window will pop out. Select UBX->CFG(Config)->MSG(Messages)
- Select the outputted information in the option Messages View, such as F0-01 NMEA GxGLL
- If the option UART1 is deselected, this information will be masked.Click the button Send to transmit the command to the GPS module. Now, this information is masked.
{{{5}}}
Answer:
- Select View->Messages View, and then a window will pop out. Select UBX->CFG(Config)->TP(Timepulse)
- Configure the setting in the option Pulse Lenth
- Click the button Send to transmit the command to the GPS module. Now, the outputted clock pulse is modified to the new setting.
{{{5}}}